Description
LLDPE Virgin granules off grade/ powder LLDPE
1, LLDPE film grade
Tests Value
Unit
Melt Flow Rate: 2.0±0.4g/*0min
Density :**0±2Kg/cm3
Tensile Strengthat Yield:8Mpa ≥
Tensile Strengthat Break:*2Mpa
haze:*5%≤
Packing: In *5 kg PP woven bags,*0MT/*0FCL
1. HDPE High Density Polyethylene materials
2.virgin/recycle HDPE
Mass density 0.****0.**9g/cm 3
Melt flow Rate(**0 centidegree /2.*6kg) ≤1.0g/*0min
Tensile yield strength ≥*9.0MPa
Flexural modulus ≥*
*@********************mpact Embrittlement temperature MAX ***8centidegree
1.Low Density Polyethylene LDPE granules
2.Virgin & Recycled
Grade:
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade.
Specification :
LDPE Injection Grade
Tests
Value
Melt Flow Rate (MFR)
*5g/*0min
Density
0.**2 g/cm3
Tensile Yield Strength 7
Mpa
Elongation at Break
*5 %
Wien Softening Point
*5°C
Packing In *5 kg PP woven
bags,*0MT/*0FCL
ABS Plastic/ABS Granules/Recycled Grade Plastic
ABSGranules
High Liquidity/Flowability
Character:
1) ABS is a high strength, good toughness, easy process forming of
thermoplastic polymer material.
2) It is the graft copolymer of Acrylonitrile, Butadiene and
Styrene.
3) ABS plastic molding temperature of ******0 ° C, but preferably
not more than **0 ° C, or resin will break down.
Details: *5% to *5% of acrylonitrile, 5% to *0% of butadiene, *0% ~
*0% of styrene, the most common ratio is A: B: S = *0: *0: *0
