Description

Single Row Tapered Roller Bearing ****0

Inner Ring: **0.**0mm
Outer Ring: **0.**0mm
Width: *1.**0mm
Width of Inner Ring: *1.**0mm
Width of Outer Ring: *9.**0mm
Chamfer of Inner Ring: 3mm
Chamfer of Outer Ring: 2.5mm
Basic Dynamic Load Rating: **0KN
Basic Static Load Rating: **0KN
Limited Speed (rpm): **0(grease)/***0(oil)
Gross Weight: 9.5kg
Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged, optimizing rolling conditions. Tapered roller bearings are utilized in applications where there is a combination of radial and axial (thrust) loads. Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the "cone", and the outer ring is called the "cup". Internal clearance is established during mounting by the axial position of the cone relative to the cup.
It is important to note that tapered roller bearings are predominantly sold as individual components. Therefore, it is important to know the part number of both the cup and the cone, as they will most often differ and there are often many cup/ cone combinations available.  While feasible to replace only the cup or the cone when replacing a tapered roller bearing, it is not recommended as it greatly decreases bearing life.
Tapered roller bearings are used in numerous applications and are capable of high loads and speeds. The predominant use is in any wheel application, where the tapered roller bearings are normally arranged in back to back pairs where they support axial and radial loads in both directions. Tapered roller bearings are available in a wide array of both inch and metric sizes.