Description

Spherical Thrust Roller Bearing ****8

Inner Ring: **0.**0mm
Outer Ring: **0.**0mm
Width: *8.**0mm
Chamfer: 4mm
Basic Dynamic Load Rating: ***0KN
Basic Static Load Rating: ***5KN
Limited Speed (rpm): **0(grease)/***0(oil)
Gross Weight: *5kg
Brass Cage

Spherical thrust roller bearings also called spherical roller thrust bearings have specially designed raceways and barrel-shaped rollers (convex rollers). The raceway of housing washer of this bearing type is spherical with the center of the radius located on the bearing axis. Spherical thrust roller bearings are separable design, making it possible to mount and dismount the housing washer separately from the shaft washer and roller and cage assembly, as well as maintenance inspections. The design provides self- alignment capability to the bearing, some shaft misalignment can be tolerated. The Contact angle is approximately *5° enabling the bearing to support high axial load and radial load up to *5% of axial load. They are suitable for relatively high speeds. The bearings have pressed steel cages or machined brass cages. Because of the large load capacity and self-aligning characteristics, Spherical thrust roller bearing is often used for injection molding machines, crane hooks and other large machines.

****0: **0mm***0mm**2mm
****0: **0mm***0mm**7mm
****2: **0mm***0mm**8mm
****2: **0mm***0mm**3mm
****4: **0mm***0mm**4mm
****4: **0mm***0mm**8mm
****6: **0mm***5mm**8mm
****6: **0mm***0mm**5mm
****8: **0mm***0mm**0mm
****8: **0mm***0mm**5mm
****0: **0mm***0mm**0mm
****0: **0mm***0mm**0mm
****2: **0mm***0mm**7mm
****2: **0mm***0mm**5mm
****4: **0mm***0mm**7mm
****4: **0mm***0mm***3mm
****6: **0mm***0mm**2mm
****6: **0mm***0mm**3mm
****6: **0mm***0mm***9mm
****8: **0mm***0mm**8mm
****8: **0mm***0mm**8mm
****8: **0mm***0mm***5mm
****0: **0mm***0mm**8mm
****0: **0mm***0mm**5mm
****0: **0mm***0mm***2mm
****4: **0mm***0mm**8mm
****4: **0mm***0mm**5mm
****4: **0mm***0mm***2mm
****8: **0mm***0mm**0mm
****8: **0mm***0mm**5mm
****8: **0mm***0mm***2mm
****2: **0mm***0mm**0mm
****2: **0mm***0mm**5mm
****2: **0mm***0mm***2mm
****6: **0mm***0mm**0mm
****6: **0mm***0mm**5mm
****6: **0mm***0mm***5mm
****0: **0mm***0mm**3mm
****0: **0mm***0mm***9mm
****0: **0mm***0mm***5mm
****4: **0mm***0mm**3mm
****4: **0mm***0mm***9mm
****8: **0mm***0mm**3mm
****8: **0mm***0mm***0mm
****2: **0mm***0mm**5mm
****2: **0mm***0mm***2mm
****2: **0mm***0mm***0mm
****6: **0mm***0mm**5mm
****6: **0mm***0mm***2mm
****6: **0mm***0mm***5mm
****0: **0mm***0mm**5mm
****0: **0mm***0mm***2mm
****0: **0mm***0mm***5mm
****4: **0mm***0mm**5mm
****4: **0mm***0mm***0mm
****2: **0mm***0mm**5mm
**2/**0: **0mm***0mm***3mm
**3/**0: **0mm***0mm***0mm
**4/**0: **0mm***0mm***4mm
**2/**0: **0mm***0mm***5mm
**4/**0: **0mm***0mm***0mm
**2/**0: **0mm***0mm***2mm
**3/**0: **0mm***0mm***0mm
**3/**0: **0mm****0mm***2mm