Description

STP系列：錫膏印刷機 Stencil Printer
專用於SMT錫膏鋼版、網版印刷。適用精密細小腳距。 採用無工具更換，不同規格變更快速又容易。双面板印刷可以快速更換完成，且非常精密。設定及清除快速。X、Y軸和角度可以調整。
Special for SMT stencil and screen printing. Available for precision, fine pitch and double side printing. Quick set up and remove. X /Y axis and angle are adjustable. Fast change different boards without tools. Double side printing can be completed and changed quickly and precisely.
 
STP***0 手動錫膏印刷機 Manual Stencil Printer
適合框架Available Frame：*0〞× *0〞(**8 × **8mm) 鋼板框上須鑽孔                                       
印刷範圍Printing Area：*6〞× *8〞(**6 × **7mm) 再小範圍可以客製               
PCB板厚度 PCB thickness：必須大於 >0.8mm
重覆誤差Repeatability：0.**8mm
機台淨重Net Weight：*0 kgs
刮刀長度Length of Squeegee：**5mm
機台尺寸Dimension：**0 × **0 × **0mm
 

• Precise, self-locking X, Y, and theta adjustments
• Tooling for double-sided board, single or double side boards are available.
• Available frames size up to *0" x *0" (**8 x **8mm) must tab on the frame.
• Printing area is *6" x *8" (**6 x **7mm) smaller area is available for customization.
• PCB thickness must be thicker than 0.8mm.
• 0.***3" repeat-ability.
• Sturdy - weighs **0lbs
• Quick setup, quick cleanup and easy maintenance. 
• Handheld squeegee with *0" rubber    blades