Description
SPECIFICATIONS FOR JET FEUL 54
ROPERTIES UNIT RESULT TEST- IP METHOD ASTM
ADDITIVES
Antioxidant in hydro processed fuel Mg/I min 17
Antioxidant non hydro processed fuel Mg/I max 24
Static dissipater first doping ASA-3 Mg/I min 24
Stadis 450 Mg/I min 1
COMBUSTION PROPERTIES
Smoke point mj/lkg min 18.4 D4808
Specific energy, net Mm min 19 D1322
Luminomitter number min 45 D1740
Naphthalenes % volume max 3 D1840
COMPOSITION
Total Acidity mg KOH/g max 0.01 354 D3242
Aromatics % vol max 22 158 D1318
Sulphur, Total % mass max 0.30 107 D1266/2622
Sulphur, Mercaptan % mass max 0.003 342 D3227
Doctor, test 30 D4952
VOLATILITY
Initial Boiling Point Centigrade max Report 123 D96
10% vol at C 240
20% vol at C Report
50% vol at C Report
80% vol at C Report
End point Centigrade max 300
Recovered residuals % Vol max 1.5
Loss % Vol max 1.5
Flash Point Centigrade max 42 170/303 D56/3828
Density at 15 C Kg/m2 min/max 776/840 180/305 D1256
LOW TEMPERATURE
Freezing Point Centigrade max -40 15 D2256
CORROSION
Corrosion, copper (2hrs at 100C) max 1 154 D130
Corrosion, silver (4hrs at 50C) max 1 227
Thermal stability control, Temp. 280C
Filter pressure, differential mm.Hg max 323
Tube deposit rating (visual) max 25
CONTAMINATIONS
Existent Gum mg/100ml max 7 131 D361
Water reaction, interface rating max 16 258 D1084
Fuel with static dissipater additives min 75 D3648
Fuel without static dissipater additive min 85
Electrical conductivity p3/m Report
