Description

1. The height of the center axis above the bed **5
2. The maximum outer diameters of the installed workpieces, mm
   - in a roll rest *0 ... **0
  -   in the headstock cartridge (due to interchangeable cams) *0 ... **0
3. The maximum lengths of workpieces, mm ***0 ... ***0
4. The maximum diameters of the machined holes, mm.
     boring (rolling) *0 ... **0
5. The maximum stroke length of the stem headstock, mm
   -without telescopic device ***0
   - with telescopic device ***0

6. Spindle speed limits, rpm *0 ... **0
7. Diameter of the hole in the headstock spindle, mm, not less than **5
8. Diameter of the hole in the stem headstock spindle, mm, not less than *0
9. The limits of the working feed stem head, mm / min 5 ... ***0
*0. The accelerated feed of the headstock of the stem, mm / min ***0
*1. The highest torque on the spindle of the headstock of the product, kN.m, not less than 3.6
*2. Pulling force on the lead screw when cutting in the range of 5 ... **0 mm / min, kN *0
*0. The highest productivity of the coolant pumping station, l / min **0
*1. The highest pressure coolant, MPa 2.5
*2. Drive power of headstock, kW *0
*3. Power of the feed box, kW 8
*4. The total power of the electric motors installed on the machine, kW *6.5
*5. Overall dimensions of the machine (together with separately located
aggregates and electrical equipment), mm
      - length ****0
      - width ***0
      - height ***0

*6.Weight of the machine (together with separately located units and electrical equipment), kg ****0