Description

The aluminum veneer of enveloping column has arc aluminum veneer and square aluminum veneer. The shape of the aluminum veneer of enveloping column depends on the shape of the column. For example, the circular column USES arc aluminum veneer, while the square column USES square aluminum veneer.Therefore, if there are decorative columns in the building, aluminum cladding is the best choice.
 
The main function of aluminum veneer of envelop is the same as that of aluminum veneer to architecture.There are two main aspects, on the one hand, it plays a practical role in protecting the building, on the other hand, it plays a good decorative effect on the building.The aluminum veneer is used to make the columns more metallic and modern.
In addition to the above two functions, it also has the advantages of convenient installation and maintenance, can be completely recycled and utilized, long service life and so on, suitable for all kinds of large building columns.
Enveloped aluminum veneer is a special aluminum veneer, arc also have square, arc aluminum veneer and square aluminum veneer in roughly the same.
 
The installation method of envelop aluminum veneer can be divided into the following four steps:
(1) lay out wires, fix the steel frame, and bounce the position of the frame onto the base.The skeleton is fixed on the main structure. Check the quality of the main structure before laying out.
(2) the connectors for fixing the skeleton shall be welded on the column of the main structure to fix the skeleton.
(3) to fix the skeleton, which shall be treated with antisepsis after welding.The mounting frame position is accurate and the structure is firm.After installation, check center line, surface elevation, etc.In order to ensure the mounting accuracy of the plate, it is advisable to use theodolite to connect the beam mullion.The deformation joint, settlement joint and variable section should be properly treated to meet the service requirements.
(4) install the aluminum plate. The installation and fixation of the aluminum plate shall be firm and reliable, simple and easy to operate.
 
1. The clearance between plates shall be internally processed to make them smooth and smooth.
2. After the installation of aluminum plate, cover with plastic film or other materials to protect the parts that are prone to pollution.