Glazed time roll forming machine, Metal roof Tile panel roll forming machine, steel tile forming mchine, Glazed tile forming machine, glazed tile roll forming machine, tile forming machine.
Main Parameter
(1) Material to be rolled: Q235, Colorbond Steel, coil
(2) Thickness of the material: 0.4-0.8mm
(3) Coil width max: 1000mm/1200mm
(4) Inner diameter of the coil: 520mm, subject to buyer\'s requirement
(5) Outer diameter of the coil: ≦1800mm
(6) Decoiler: 5000kg, manual expansion
(7) Roll stands: 13
(8) Main structure: wall style entire steel structure
(9) Driving system: chain transmission
(10) Main power: 5.5KW
(11) Main reducer: cycloid pin
(12) Cutting: Hydraulic cutting
(13) Power of hydraulic station: 3KW
(14) Material of blade: Cr12, heat treated HRC58-62
(15) Measure: encoder
(16) Controller: PLC, Transducer,
(17) Forming speed: 2-4m/min (with punch)
(18) Weight: abt.10MT 
(19) Dimension (L*W*H) Main Machine: 7.0m*1.65m*1.4m
 
4. Process and Features
Decoiler - Guiding -Roll Forming - Encoder -Hydraulic Punching -Hydraulic Cutter - run out table
1. This M/C adopts inner-expansion manual decoiler. The diameter can be adjusted through the adjusting bolt according to the coil\'s inner diameter. The operation is quite easy. The decoiling speed is to the main machine\'s forming speed.
2. The main frame is structured by welding entire T shape steel. The side stands are welded on the frame, and to clear the stress by vibration in order to maintain the rigidity and stability of the machine.
3. The forming rollers are made of GCr15 bearing steel through a series of heat treatment such as forging, distressing anneal, high frequency hardening(the degreed is 8-10mm), backfiring, phosphorization etc. The surface of the rollers can reach the rigidity of HRC58-62. All the forming rollers are process on CNC lathe, by which the accuracy can be granted.
4. The main shaft is made of 40Cr advanced alloy steel after a series of heat treatment such as high frequency hardening, quenching and tempering etc and processed on lathe, burnishing the surface, wire cutting the channel to make it high accuracy and large capacity.
5. Punching or power press is adopted to form the steps of the tile. The press is controlled on the PLC. The pitch is adjustable by PLC.
6. Cut to length is the last process of this machine line. It cuts accurately to any length you set on the PLC. The cutter consists of Hydraulic diver, profiled blade and cutter frame. The blade is made from Cr12 cold punching steel after strict process. It adopts 45 degree staggering cutting. This costs no waste and can hold the cutting profile a good shape. And this cutting is of high accuracy.
7. The machine adopts P nasonic industrial PLC, touch screen,   VF series Transducer