Description

Blood Bank Refrigerator (4deg C) ABR-V**8 ARI  

The Blood Bank Refrigerator (4°C) ABR-V**8 ARI is  a specially designed forced-air cooling system to ensure frost-free cabinet and good temperature uniformity.

Our Blood Bank Refrigerator (4°C) ABR-V**8 ARI features accurate microprocessor controller to ensure consistent cabinet temperature 4±1℃, Three layers toughened glass door with heater to avoid condensation, **4 stainless steel inner chamber for friendly using and easy cleaning and Wide available voltage range: **7V~**2V.

-Capacity: **8L

-Temperature range: 4±1℃

-Ambient temperature: *0~*2℃

-Controller: Microprocessor

-Display: Digital display

-Compressor: 1

-Refrigerant: R**4a

-Cooling type: Forced-air cooling

-Defrost type: Frost free

-Power supply: **0V *0~*0Hz; **5V *0Hz

-Rated power: **0W

-Electrical current: 0.8A

-Power consumption: 2.*2kWh/*4h

Safety

-Safety door lock and controller setting password to prevent unauthorized access

-Inner doors and auto on/off cooling fan to prevent cold air from leaking out when the door is opening

-Built-in backup battery to display temperature and to operate audible and visual alarm system for up to *2 hours without AC power

-Alarms: high/low temperature, power failure, sensor failure, door ajar, condenser abnormal, low battery

-Power failure protection: turn on delay of the cooling system after power failure

-Controller error protection: the cooling system will remember the normal working cycle and keep working depending on this memory when controller or two sensors failed

-Temperature printer: print current inside temperature automatically per *0 minutes

Humanized Design

*4 castors with stopper for easy moving and fixation

*4 adjustable shelves and *2 blood baskets for easy using

-Special designed service-free drainage system ensure no water in the cabinet

-Standard *5mm test hole for easy connecting to temperature monitoring systems

-Automatic on/off LED light with manual switch on control panel

Accessories

-Castor: 4

-Lamp: LED

-Shelf: 4

-Test hole: 1

-Temperature printer: 1

-Chart recorder: optional

Dimension

-Interior size (W*D*H): **2***2***8mm

-Exterior size (W*D*H): **2***0****0mm

-Package size (W*D*H): **0***0****0mm

-NW/GW: *6/**0KGS

-Loading quantity (*0/*0/*0H): *3/*8/*8