Product Description

Fly ash AAC Plant Production Engineering:

1. First, dose and match measured raw materials

2. After distributing, feed raw material into pouring mixer to make slurry

3. Through thoroughly mixing, the slurry is poured to mould

4. After precuring with a certain temperature & time, the block would reach certain hardness prepare for cutting

5. Tilting hoister would turn over *0 degree of mould

6. Then open the mould & separate it from block, take the block with side plate with cutting cart

7. The block then be cut through the cutter firstly of two vertical sides of block

8. Secondly the horizontal cutting

9. Finally the vertical cutting

*0. After cutting, the block is hanged to trolley with side plate by semifinished product hoister

*1. Organizing the cut blocks and put them into autoclave

*2. Hardening the blocks under certain temperature and pressure

*3. Take finished products out of autoclave

*4. The finished product hoister takes the finished product to stock shield

*5. Packed for loading

*6. The side plate return back by side plate roller

*7. Side plate would be organized with open mould

*8. Clean the mould and preparing for next pouring

*9. Steel bars processing line for slab production 

 We Are Offering Fly ash AAC Plant With Following Annual Capacity:

*0,**0 m3 Fly ash AAC Plant; *0,**0 m3 Fly ash AAC Plant

*0,**0 m3 Fly ash AAC Plant; **0,**0 m3 Fly ash AAC Plant

**0,**0 m3 Fly ash AAC Plant; **0,**0 m3 Fly ash AAC Plant

**0,**0 m3 Fly ash AAC Plant; **0,**0 m3 Fly ash AAC Plant

**0,**0 m3 Fly ash AAC Plant; **0,**0 m3 Fly ash AAC Plant