Product Description

AAC Block Line
1. ISO***1 CE 
2. Germany Ytong Technology
3. Higher Quality Equipments
4. Super Plant Designing

Fuwei AAC Block Line Advantages:

1. Applied Germany Ytong technology and combined with China innovation;

2. Cutting machine adopt frame shaking and cutting, which is most reliable designing;

3. Turning table realizing sixsides peeling successfully for aac block cake;

4 Choosing JQF cutting machine with 4.2 meters long, which is designed based on the foreign technology.Up to now, it has gone through several improvements and become the most advanced model domestically. Its annual max cutting capacity reach *****0 cubic meters

7. China AAC Association Group best quality and scientific designing;

8. Equipments lifetime maintaining service.

Introduction of AAC Block Line:

Autoclaved Aerated Concrete (AAC) Block, also called Light Block, used siliceous (fly ash, sand, slag) and calcareous (lime & cement) as the main raw materials, which through the process of batching, pouring, precuring, cutting, autoclaving, separating and packing to make into the final products. It is new type & environmental construction material and widely used for industry and civil building construction. AAC Block is the most mature technology of production and application in the worldwide nowadays.

Advantages & Features of AAC Block Line:

1. Good Thermal Insulation Property: 0.1~0.*0W/(m · k)

2. Keeping Temperature, Heat Resistant, Fireproof

3. Good Sound Insulation

4. Earthquake Proof

5. Good Machinability

6. Conveniently Mechanized Construction

Production Engineering of AAC Block Line:

1. First, dose and match measured raw materials

2. After distributing, feed raw material into pouring mixer to make slurry

3. Through thoroughly mixing, the slurry is poured to mould

4. After precuring with a certain temperature & time, the block would reach certain hardness prepare for cutting

5. Tilting hoister would turn over *0 degree of mould

6. Then open the mould & separate it from block, take the block with side plate with cutting cart

7. The block then be cut through the cutter firstly of two vertical sides of block

8. Secondly the horizontal cutting

9. Finally the vertical cutting

*0. After cutting, the block is hanged to trolley with side plate by semifinished product hoister

*1. Organizing the cut blocks and put them into autoclave

*2. Hardening the blocks under certain temperature and pressure

*3. Take finished products out of autoclave

*4. The finished product hoister takes the finished product to stock shield

*5. Packed for loading

*6. The side plate return back by side plate roller

*7. Side plate would be organized with open mould

*8. Clean the mould and preparing for next pouring

*9. Steel bars processing line for slab production

Fuwei Can Offer AAC Block Line with Following Annual Capacity:

*0,**0 m3AAC Block Line; *0,**0 m3 AAC Block Line ;

*0,**0 m3AAC Block Line; **0,**0 m3 AAC Block Line;

**0,**0 m3AAC Block Line; **0,**0 m3 AAC Block Line;

**0,**0 m3AAC Block Line; **0,**0 m3 AAC Block Line;

**0,**0 m3 AAC Block Line; **0,**0 m3 AAC Block Line