Product Description

PRODUCT DESCRIPTION Autostrip Powder is a white crystaline powder comprising Sodium Metaperiodate. APPLICATIONS Autostrip Powder is sold strictly for use in the screen printing industry for removal of PVA/PVOH based stencils ***** Emulsions, Capillex, Autostrip Powder offers easy storage and handling but must be mixed with the prescribed amount of water before use. Mixing of Autostrip Powder For general use dissolve contents in *0 litres (*8 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life. Use of Autostrip Solution 1. Remove all ink residues by applying Autosolve Graphics, Industrial or Textile to both sides of the mesh and work in with a brush. 2. Wash both sides of mesh with water to remove all solvent traces. 3. With a brush, apply Autostrip liberally to both sides of the mesh. 4. Leave to stand for **5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove. 5. Wash off the stencil with a strong spray or high pressure gun. SHELF LIFE & STORAGE It must be stored in sealed containers in a cool dry place out of children’s reach. Shelf life is two years. PACKAGING This product is sold in foil lined sachets. Sachet: **0g Wholesale: 1 koligram