Optcore The **0G CFP2 LR4 optical transceiver integrates the transmit and receive path onto one module. On
the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers,
which control four electric-absorption modulated lasers (EMLs) with ***6, ***0, ***5, and ***9 nm center
wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier,retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.

• Duplex LC receptacle optical interface
• Single *3.3V power supply
• Hot-pluggable
• Operating optical data rate up to **2Gbps
• Operating electrical serial data rate up to *7.*****3Gbps
• 4 parallel electrical serial interface
• AC coupling of CML signals
• PIN ROSA
• Low power dissipation(Max:9W)
• Built in digital diagnostic function
• Operating case temperature range:0℃ to *0℃
• Compliant with **0GBASE-LR4 and OTU4
• MDIO Communication Interface
• Compatible with all kinds of commercial ONT
• Temperature range: 0°C to **0°C

• Compliant with IEEE **2.3ba
• Compliant with CFP2 MSA hardware specifications
• Compliant with CFP2 MSA management specifications
• Compliant with ITU-T G**9/Y.***1
• Compliant with RoHS