Product Description
Slitting shears are a kind of dedicated
equipment used to longitudinally cut a wide into sized flat
steels, which are used as raw stocks for steel bar
gratings.
A. Requirements for raw stock (coil
strip)
1)
Coil strip thickness: **6mm.
2)
Coil strip width: ******0mm.
3)
Coil strip I.D. :Ф******0mm.
4)
Coil strip O.D. :≤Ф***0mm.
5)
Weight of a strip coil＜3T.
6)
Coil strip material: Q***5A, B hot-milled plain carbon
steel.
B. Main technical
parameters
1)
Power supply: A.C. *-phase **0V, *0Hz
2)
Width of sized flat steel: ****0 mm
3)
Quantity of sized flat steels: ***0 pieces.
4)
Longitudinal cutting precision:
Width:± 0.*5mm,
Lateral
flexure: It conforms to Chinese Standard GB*****8 (Flat Steel
GB*****8)
5)
Diameter of longitudinal cutting blade shaft:φ**0
6)
Size of longitudinal cutting blade:φ**0x**0xH
mm.
7)
Material of longitudinal cutting blade: material 9CrSi, hardness
HRC *5°-*0°.
8)
Diameter of flattening rollers:φ**5mm
9)
Materialof flattening
rollers: *0Cr, hardness HRC *2°- *5°
*0)Flattening speed: *0m/min.
8)
Dimension (M): L 8 X W3 X H 1.5 (Erection length: about *0
M).
C. Process Flow
Uncoiling—Guiding—Longitudinally-shearing—Edge
trimming**-Flattening**-Sizing—
Laterally-cutting— Flat steel
receiving.
D. Constitution
A complete set of the equipment
essentially includes following parts:
1. Uncoiler:
Supporting weight 3T
2. Front
working platform: Length 4 M
3. Guiding-alignment
mechanism
4. Slitting
shears set: It includes main machine and driving system. The
main machine is composed of basement, stationary frame, mobile
frame, hydraulic regulation mechanism, 2 pieces of slitting shears
shafts and shaft moving up & down mechanism, etc. The driving
system includes *5KW AC variable motor, gear reducer
box, coupling, clutch, cardan, and power basement,
etc.
5. Edge
trimmer: It is inclusive of 4KW motor, gear reducer, frame,
edge-trimming shaft, edge-trimming disk, friction mechanism, chain
transmission mechanism, etc.
6. Rear
working platform: Length 2.5 M
7. Clamping-feeding-flattening
unit: It includes main machine and driving system. The main
machine is composed of basement, frame, upper & lower
pedestals, lateral beam, *3 pieces of flattening rollers, upper
roller hydraulically-moving up & down mechanism, gear reducer
etc. The driving system includes power basement, gear reducer, *5KW
motor, coupling, breaker, *3 pieces of universal
shafts, etc.
8. Sizing
unit with coder
9. Hydraulic
cutting unit: It includes basement, cutting frame, stationary knife
seat, sliding knife support, hydraulic cylinder,
etc.
*0. Hydraulic system
*1. Electric and control system: It includes A.C.
switchgear, operating console, CNC LCD screen,
etc.
Note: Slitting shears can be customized according to
customer's requirement. Equipment cost greatly depends on width of
coil strip. The wider the coil strip, the higher the
cost.
Note: Slitting shears can be customized according to
customer's requirement. Equipment cost greatly depends on width of
coil strip. The wider the coil strip, the higher the
cost.
Slitting shears are a kind of dedicated
equipment used to longitudinally cut a wide coil strip into sized
flat steels, which are used as raw stocks for steel bar
gratings.
A. Requirements for raw stock (coil
strip)
1)
Coil strip thickness: **6mm.
2)
Coil strip width: ******0mm.
3)
Coil strip I.D. :Ф******0mm.
4)
Coil strip O.D. :≤Ф***0mm.
5)
Weight of a strip coil＜3T.
6)
Coil strip material: Q***5A, B hot-milled plain carbon
steel.
B. Main technical
parameters
1)
Power supply: A.C. *-phase **0V, *0Hz
2)
Width of sized flat steel: ****0 mm
3)
Quantity of sized flat steels: ***0 pieces.
4)
Longitudinal cutting precision:
Width:± 0.*5mm,
Lateral
flexure: It conforms to Chinese Standard GB*****8 (Flat Steel
GB*****8)
5)
Diameter of longitudinal cutting blade shaft:φ**0
6)
Size of longitudinal cutting blade:φ**0x**0xH
mm.
7)
Material of longitudinal cutting blade: material 9CrSi, hardness
HRC *5°-*0°.
8)
Diameter of flattening rollers:φ**5mm
9)
Materialof flattening
rollers: *0Cr, hardness HRC *2°- *5°
*0)Flattening speed: *0m/min.
8)
Dimension (M): L 8 X W3 X H 1.5 (Erection length: about *0
M).
C. Process Flow
Uncoiling—Guiding—Longitudinally-shearing—Edge
trimming**-Flattening**-Sizing—
Laterally-cutting— Flat steel
receiving.
D. Constitution
A complete set of the equipment
essentially includes following parts:
1. Uncoiler:
Supporting weight 3T
2. Front
working platform: Length 4 M
3. Guiding-alignment
mechanism
4. Slitting
shears set: It includes main machine and driving system. The
main machine is composed of basement, stationary frame, mobile
frame, hydraulic regulation mechanism, 2 pieces of slitting shears
shafts and shaft moving up & down mechanism, etc. The driving
system includes *5KW AC variable motor, gear reducer
box, coupling, clutch, cardan, and power basement,
etc.
5. Edge
trimmer: It is inclusive of 4KW motor, gear reducer, frame,
edge-trimming shaft, edge-trimming disk, friction mechanism, chain
transmission mechanism, etc.
6. Rear
working platform: Length 2.5 M
7. Clamping-feeding-flattening
unit: It includes main machine and driving system. The main
machine is composed of basement, frame, upper & lower
pedestals, lateral beam, *3 pieces of flattening rollers, upper
roller hydraulically-moving up & down mechanism, gear reducer
etc. The driving system includes power basement, gear reducer, *5KW
motor, coupling, breaker, *3 pieces of universal
shafts, etc.
8. Sizing
unit with coder
9. Hydraulic
cutting unit: It includes basement, cutting frame, stationary knife
seat, sliding knife support, hydraulic cylinder,
etc.
*0. Hydraulic system
*1. Electric and control system: It includes A.C.
switchgear, operating console, CNC LCD screen,
etc.
Note: Slitting shears can be customized according to
customer's requirement. Equipment cost greatly depends on width of
coil strip. The wider the coil strip, the higher the
cost.
| Country: |
China |
| Model No: |
Model （2-6）X500mm
|
| FOB Price: |
(Negotiable)
Get Latest Price
|
| Place of Origin: |
China |
| Price for Minimum Order: |
- |
| Minimum Order Quantity: |
- |
| Packaging Detail: |
Container |
| Delivery Time: |
- |
| Supplying Ability: |
- |
| Payment Type: |
L/C |
| Product Group : |
- |
