Product Description

Encapsulant and Potting silicone to sealing bonding and coating for electronic parts Filling for LED, LCD electronic display Encapsulant and Potting silicone Applications of Encapsulant and Potting silicone: Encapsulant and Potting silicone is applicable to sealing, bonding and coating for electronic parts. Filling for LED, LCD electronic display, circuit board. Description of Encapsulant and Potting silicone: HY***0# Encapsulant and Potting silicone is two-component room temperature vulcanization silicone rubber, which has low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance. Standard Datasheet of Encapsulant and Potting silicone: Model HY***0# Encapsulant and Potting silicone Type Gel-type Components A B Appearance (liquid) black / transparent / white yellowy Mixing ratio **0 5 Viscosity (Pa.s) ***0 Pot life(*5C) (mins) *0 - *0 Curing time (mins) 2 - 4 Hardness shore A *5 ± 2 Tensile strength (Mpa) 0.5 - 1.5 Elongation at break (%) *0 - *0 Dielectric strength (kv/m*1) *0 Specific inductive capacity(1MHz) 2.8 - 3.2 Breakdown voltage (KV.mm*1) *6 Volume resistivity () 1×***4 Dielectric loss factor (1MHz) 1×***3 Features of Encapsulant and Potting silicone: HY***0# Encapsulant and Potting silicone has sticky viscosity, low shrinkage and non-corrosive; the HY***0# Encapsulant and Potting silicone can be used for a long period at the temperature of **0C***0C with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing. Using Instructions of Encapsulant and Potting silicone: 1. Clean and dry the electronic element to be poured; 2. Mix the component A (silicone) and component B(hardener) evenly according to the proportion, and can be poured after deaired the bubbles. The surface will cure in about **4 hours after pouring. More information need about our HY***0# Encapsulant and Potting silicone, please feel free to contact with Miss Apple. Tel: ****************3 Moible: ***************1