GSM Terminal Use As Backup For PSTN in The Alarm System

Product Description

GSM Terminal Use As Backup For PSTN in The Alarm System with built in alarm s allow the GT***0 Unit to send (Ademco Contact ID) additional signals to CMS monitoring station.

Alarm backup system with built in 3 s and 3 outputs

The new GT***0 GSM Terminal is a wireless communicator for alarm, fire panels that uses the cell phone network (GSM) to transmit alarm and other panel event. The module check the status of the PSTN line and in case the PSTN line become unavailable, the GT***0 GSM emulate the line signal to the panel. at this time, the panel will dial out using the GSM cell phone network to communicate with the receive at the CMS station and transmit the reports. Gt***0 also has built in alarm s allow the GT***0 Unit to send (Ademco Contact ID) additional signals to CMS monitoring station. GT***0 offer a number of solutions to open gates by a simple phone call. Just dial a number to open your gates. GT***0 User List of numbers who are enabled to open the phone, up to **0.         

Features:
 
-Allows any contact ID alarm to transmit alarms over GSM using the GSM voice Channel.
 
-Work over the GSM cell phone networks units can be used wherever there is cell phone coverage.
 
-GT***0 uses the telephone line as the main transmission line and uses the GSM Voice channel as backup.
 
-GT***0 has built-in alarm s that allow the unit to send (Ademco Contact ID) additional signals to CMS monitoring station.
 
-Three open collector outputs (that can sink max **0ma per output) can be turned on and off remotely through a sms or phone call.
 
-Programmable cell phone number to notify the user that the PSTN line has been cut off or unavailable.
 
-GT***0 offer a number of solutions to open gates by a simple phone call. Just dial a number to open your gates.
 
-GT***0 User List of numbers who are enabled to open the phone, up to **0.

 

Function:
 
-Programmable 5 Administrator/CMS Number

-Programmable Recipient that will receive Alert Messages

-Programmable Area Code

-Programmable the dialing time

-Programmable Clock Setting

-Programmable Account Number for CMS

-Programmable Auto Test Report Time Section up to 3 Sections

-Programmable sending Reports to CMS

-Programmable generation of sms report for auto test

-Programmable for PSTN send sms Failure

-Programmable for PSTN sending report to CMS (Failure) and connected

-Programmable for AC Failure sending report to CMS or SMS to admin number

-Programmable Inputs failed or connected sending reports to CMS or admin numbers

-Programmable Enable/Disable System Power up SMS Notification

-Programmable Ignore the front dialing digits when dialing the Administrator or CMS number

-Programmable adjusting the Speaker and Microphone Volume level

-Programmable Editing the Inputs Alert Messages (detecting 5~*2VDC triggered)

-Programmable Editing the Input Alert Message For (detecting 0 VDC triggered)

-Programmable Editing the Outputs (Open) Alert Messages

-Programmable Editing the Outputs (Closed) Alert Messages

-Programmable Activate Outputs to Stay On for a Specific Time

-Programmable Activate the Outputs Relay to Stay On

-Programmable Activate the Outputs relay number when s triggered

-Programmable User List to trip the outputs 1, 2, 3 (User list number is up to **0 numbers)

-Programmable Output Pulse time via SMS

-Programmable Reset to factory default via SMS

-Programmable Checking the Signal Strength via SMS

-Programmable Inquire the All Status

-Programmable Checking the Current Time Status via SMS

 

Main Features of the GT***0:

 

    Telephone line backup:GT***0 give priority to the lowest cost network. GT***0 uses the telephone line as the main transmission line and uses the GSM voice channel as backup

    Programmable CMS Account Number: The GT***0 has built-in alarm s that allow the unit to send (Ademco Contact ID) additional signals (with user programmable CMS Account number) to the monitoring station. The Alarm Events that available in this system are PSTN Failure, AC Failure and Auto Test. Supported Protocol: Ademco Contact ID

    Sends text messages to user programmable cell phone number (SMS): The GT***0 can be programmed to send a SMS to a programmable cell phone number to notify the user that the PSTN line has been cut off or unavailable.

    Three digital s: The system has the function to send SMS and call to the user in the event of triggered. For example, Input 3 connected to an electric door, when there is intruder or the electric door is open illegally, GT***0 will receive short circuit impulse on Input 3 and automatically sends a signal to the pre-set number and notify the owner.

    GT***0 offers a number of solutions to open gates by a simple phone call. Just dial a number to open your gates. User List of numbers who are enabled to open the phone, up to **0.

    Three remote control outputs: These open collector outputs (that can sink max **0ma per output) can be turned on and off remotely through a SMS or phone call. Remote control will be reachable by sending a SMS or phone call with a certain command. For example SMS/Call in to switch on lighting, air conditional, generator, sensor or other equipment.

    Standby rechargeable battery to prevent power failure or electricity cut off by intruder. The GSM will function as normal when no electricity supply. LED to check the GSM signal strength.