Product Description

Horizontal rotating environmental protection type waste plastics refining equipment

first. China currently USES the waste plastics refining equipment host mainly adopts vertical fixed processor, the technical process is as follows: first waste plastics from cracking the top of the processor artificial to join, then closed feed port, and then processing has been begin to use coal or wood for fuel slow heating, cracking processor usually have five cubic meters of volume, charging 1 ton, general need *2 hours after practice a furnace. Ended, stop *2 hours. Etc processor temperature fully down, then open the processing has been at the bottom of the lower taphole slag, starting from the processor feed port feed, into the next cycle.

Domestic vertical refining equipment, in the production process of "three wastes" treatment cannot achieve environmental protection requirement, and yield is low, do not have continuous production ability, want to have the economic benefit need more oil refining processor joint production.

We are based on the study of families, enhances strong points and avoid weaknesses, based on the actual, from the actual situation, after years of scientific and technological research, design introduced a "flower long gold unique series refining equipment."

Second, the latest series equipment a few big characteristics (to JJ - type 2, for example)

One.each equipment consists of ten parts:

a.raw material pretreatment device:

b.fast feed device:

c.rotary cracker;

d. automatic and safe environmental protection slag system:

e.oil steam cyclone dust removal device:

f. quick condensing system;

g. the waste gas purification recovery combustion system:

h.A total of  heat to the system:

i. heat source environmental dust removal system:

j. central electric control system

two. domestic origination:

a.package unit production process is in the smokeless tasteless environments, with excellent safety and environmental protection.

b. supporting pressure-relief devices, through to the product processing, can really improve the added value of oil vice degrees.

c.In the key device cracking processor design, completely overcome the domestic current vertical flat bottom cracking processing has been local heating uneven, easy to fracture, low yield, short service life and so on adverse factors, host machine adopts horizontal to rotate **0 degrees structure, 0.4 RPM.

d.have fast and practical feed and slag system. Charging rate JJ - 9 type every *4 hours the highest quantity achieved *0 tons.

e. efficient gas heating system. In the oil refining process, when the heating gas reached **0℃