Product Description

Tiande Brand Methanol-diesel blended fuel is a environmental-protection and energy-saving fuel by adding certain ratio (in volume or in weight) denatured methanol in national standard diesel. Appearance of methanol-diesel blended fuel is clear and transparent which is close to that of diesel is. Its viscosity and heat value etc are close to that of diesel is. It can be used in diesel combustion engine instead of diesel. 
Take *0% of methanol in volume together with *0% of methanol-diesel blended fuel additive. Evenly blend the mixture until we get clear and transparent denatured methanol. Put *0% of diesel in volume into the aforesaid mixture and start to blend for about ten minutes, then we can get clear and transparent finished product_methanol-diesel blended fuel. 
Product features: 
1. Strong Power: During the process of preparation of additive, it is mixed with constituents that can increase heat value and strengthen power. Assisting by mechanical technology, it enables Tiande Brand methanol-diesel blended fuel to have stronger powers than similar products. 
2. Energy-saving and environmental-protection: By using methanol-diesel blended fuel, its noxious emissions such as CO, HC and NOX reduces fundamentally and smoke emission drops by more than *0%. 
3. Universality: Without changing structures and parameters of diesel engine, this product can be used directly to ensure it work stably, which has the equal application range and effect as that of diesel in same octane rating does. 
4. Wide scope of application: Tiande Brand cleaning methanol-diesel blended fuel is mainly used in various uses of diesel engines, motor vehicles. 
5. Long storage life: Methanol-diesel blended fuel has no phase separation and no whitening and it can be stored for three months more if moisture content in this mixture does not exceed the stipulated standards or it is under normal temperature. 
6. Infinite solubility: The methanol-diesel blends can be infinitely soluble with other national standard diesel or non-standard diesel without phase separation, emulsification or whitening. 
7. Water-resistance property: Under condition of motion or rest, it both shows state that water and oil are separated: Water in bottom is clear and transparent, and blends on top are also clear and transparent. 
Product indexes: 
1. Color and shade: 2.0 (diesel color) 
2. Density (*0 Celsius): 0.**1 
3. Freezing point Celsius: **2 
4. Cold filter point Celsius: *3 
5. Kinematic viscosity (*0 Celsius): 3.*8 
6. pH< 8 
7. Mechanical impurities: None 
8. Distillation range: *0% recovered temperature **4 
*0% recovered temperature **5 
*5% recovered temperature **4 
9. Cetane number: *5 
*0. Heat value: ≥ ***0KJ 
*1. Copper corrosion: 1A 
*2. Flash point (closed) Celsius: It is close to that of national diesel is. 
Product economic benefits analysis: