New Bitmain Antminer S9 14 TH/S With APW3++Power Supply

Product Description

New Bitmain Antminer S9 *4 TH/S With APW3++Power Supply

Please if you are interested : rogerpeasedirector AT gmail DOT com

Antminer S9 Specifications:

1. Hash Rate: *4 TH/s ±5%
2. Power Consumption: ***2W + *0% (at the wall, with APW3 ,*3% efficiency, *5C ambient temp)
3. Power Efficiency: 0.**8 J/GH + *0%(at the wall, with APW3 *3% efficiency, *5°C ambient temp)
4. Rated Voltage: *1.*0 ~*3.*0V
5. Chip quantity per unit: **9x BM***7
6. Dimensions: **0mm(L)***5mm(W)***8mm(H)
7. Cooling: 2x ****8 fan Front fan: ***0 rpm, Rear fan: ***0 rpm
8. Operating Temperature: 0 °C to *0 °C
9. Network Connection: Ethernet
*0.Frequency: Automatically set

Notes:

Power consumption figures will vary with your PSUs efficiency, the ambient operating temperature and the accuracy of the power meter.

PSU: A power supply unit is not included. There are 3 PCI-e connectors for **2V DC on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!

We recommend the APW3+*****0 power supply for use with the Antminer S9. One power supply supports one Antminer S9.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.

AntMiner-S*-Installation-Guide