FOB Price
Get Latest Price|
500 Kilogram Minimum Order
Country:
China
Model No:
BCUP-2
FOB Price:
Place of Origin:
shandong
Price for Minimum Order:
-
Minimum Order Quantity:
500 Kilogram
Packaging Detail:
diameter from 0.5mm to 4.0mm package: colies, spools, box. coated rods, rods, wires, stripes
Delivery Time:
10
Supplying Ability:
600 Ton per Week
Payment Type:
T/T
Product Group :
Contact Person jing
qianjin, Yantai, Shandong
Phos-Copper Brazing Alloys
phos-Copper brazing alloys are easy-flow, low cost ones and shows perfect performance in contact brazing, oxy-acetylene brazing, induction brazing and furnace brazing. The joint strength is higher and the conductivity is better. A flux is required while brazing brass to brass.
|
Alloy |
Corresponding Alloy |
Chemical Composition |
Melting Rang |
Features |
Typical Application |
|||
|
P% |
Sn% |
Cu% |
Solidus°C |
Liquidus°C |
||||
|
JcuP*1 |
China: Bcu*2P Japan: TC***0D |
7.**8.5 |
- |
balance |
**0
|
**0 |
Close to eutectic crystal composition, Low melting point, easy Flow, can flow into a Small cleatance of Brazing seam. |
Use for copper allou parts, refrigration Compressor,not suitable for brazing Attacking shocking bend parts. |
|
JcuP*2 |
China: BCu*3P USA: BCuP*2 Japan: TC***0A |
6.**7.5 |
- |
balance |
**1 |
**0 |
Contain a little less Phosphorus, has better Plastic nature, a little Higher melting point. |
Use for copper and copper alloy Parts, suitable for air Conditioning, refrigerator, evaporator, heat Exchanger and water heater ect. |
|
JcuP*3 |
Zhong: **2 |
6.**6.8 |
- |
balance |
**0 |
**0 |
Contain less Phosphorus, good Platic nature, a little Higher melting point. |
Can make into many kinds of brazing Ring, wires, brazing copper and Copper alloy parts, brazing clearance Tie-in |
|
JcuP*3Sn |
China: Bcu*8Pag German: Degussa*6 |
6.**7.5 |
6.**7.5 |
balance |
**0 |
**0 |
Good spread ability Good caulding ablity |
Use for many kinds of copper and copper alloy |
|
JcuP*5Sn |
China: Bcu*6SnP |
4.**5.8 |
***7 |
balance |
**0 |
**0 |
Low melting point, Easy flow |
Use for the water heater of copper Or brass, radiant heating, ect. |
|
JcuP*6Sn |
Zhong: **8 |
**6 |
**6 |
balance |
**0 |
**0 |
Low melting point, Easy flow |
Use for copper or brass parts of Water heater, radiant heating, Brazing ample clearance tie-in. |
|
JcuP*7Sn |
EU: CP**2 |
6.**7.5 |
6.**7.5 |
balance |
**0 |
**0 |
Low melting point, Easy flow |
Use for copper and copper parts Of water heater, water fountain, Fuel gas ware, radiant heating And cleaners, polishes ect. |
|
JIS Spec |
|
chemical ingredient% |
Temperature) |
|||||||||
|
Cu |
Sn |
Fe |
Ni |
Pd |
Al |
Si |
Others |
Zn |
Coagulation |
Liquefication |
Welding temperature |
|
|
BCuZn*2 |
****1 |
0.**1.5 |
- |
- |
0.5Below |
0.*2Below |
- |
- |
Rem |
**5 |
**0 |
******5 |
|
BCuZn*0 |
****6 |
- |
0.*0Below |
- |
0.5Below |
- |
- |
- |
Rem |
**0 |
**0 |
******0 |
|
BCuZn*5 |
****3 |
3.**4.5 |
0.*0Below |
- |
0.5Below |
- |
- |
- |
Rem |
**0 |
**5 |
******5 |
|
BCuZn*6 |
****0 |
- |
- |
***1 |
0.5Below |
- |
0.*5Below |
(P)0.*5Below |
Rem s |
**0 |
**5 |
******0 |
|
BCuZn*7 |
****9 |
- |
- |
****1 |
- |
- |
0.*5Below |
(Ag)0.**1.0 |
Rem |
**0 |
**0 |
******0 |
|
BCuZn*3 |
****0 |
1.0Above |
0.***1.*5 |
1.0 More |
0.5Below |
0.*1Below |
0.*5Below |
(Mn)1.0Below |
Rem |
**0 |
**0 |
******0 |
| Country: | China |
| Model No: | BCUP-2 |
| FOB Price: | Get Latest Price |
| Place of Origin: | shandong |
| Price for Minimum Order: | - |
| Minimum Order Quantity: | 500 Kilogram |
| Packaging Detail: | diameter from 0.5mm to 4.0mm package: colies, spools, box. coated rods, rods, wires, stripes |
| Delivery Time: | 10 |
| Supplying Ability: | 600 Ton per Week |
| Payment Type: | T/T |
| Product Group : | welding rod |
