Product Description

Key specifications

1. Replaces your broken garage door opener remote or adds an extra remote to your multi-car family

2. Auto learning code face to face, Copies most radio frequency fixed code remote controls

3. Operates 1 or 4 garage doors/gates, even if they are different brands(same frequency)

4. Used in car alarms, home security, panic s, garage door, openers rolling curtain, barriers and more

5. Reduce costs compare to buy a original remote

6. Long-life battery included

7. Sleek design

8. Bright LED light

*It's not suitable for original alarm, *-way remote control and rolling code remote control.

 

OPERATION MANUAL:

1.Clear the code 2. Copy 3. Adjust the frequency 4. Recover previous code

1.Clear the code:

before delivery, we put some code for testing. When you get them , please clear the code by
 pushing key A and B at the same time until LED flash 3 times. Now remain key A unmoved,
push key B 3 times. LED will keeping flashing, to tell the code has been cleared successfully.

*when you push the key, LED has no action.

2. Copy:

Put your original remote and the duplicator close to each other. Push the same key of two
 remotes you want to copy(For example the first key of original remote and key A of duplicator )
 Then relax the key until LED of duplicator keeping
flash. Other keys same operation.

* When you find it hard to copy, please change the position of two remotes. Like back to back,
head to head...

3.Adjust the frequency(******0MHz)

Confirm the frequency of your original remote ( a frequency counter will help ).
If it's same with duplicator,the remote can work directly. If not, you need to adjust
 frequency of the duplicator. We have 2 kinds of frequency ,
fix and adjustable. This step only suitable for adjustable frequency.

Open the housing of remote control you will find a jumper, take a non-metal pen to turn around the jumper. Push any key of the remote at the same time,
the frequency will show on the frequency counter. Relax the key until adjust to the
right frequency you want.

Put on the hat: **0MHz – **0MHz

Put off the hat: **0MHz ***0MHz

* You might find the frequency is changed after you fix the case of remote. This is because
 the metal case will effect
the frequency. In normal case,±**2MHz is acceptable.

4.Recover previous code

If delete the code carelessly, you can recover previous code by pushing key C and D
 at the same time until LED flashing fast.

* This step only suitable for remotes with 3 and 4 keys.