Product Description

The sand production line high degree of automation, low running costs, crushing rate, energy saving, large output, less pollution, easy maintenance, the mechanism of production of construction sand sand meet the national standard, uniform particle size, grain shape is good, supporting reasonable.

Sand production line by the vibrating feeder, jaw crusher, sand making the third generation (crushing machine), sand washing machine, vibrating screen and belt conveyor and other equipment combination. Depending on the process requirements, a combination of various types of equipment to meet customers' different process requirements.

Basic flow of sand introduced the first production line, stone crushing machine by the initial break, and then produced into a coarse material transported by the belt conveyor to the fine crusher for further crushing, crushing stone into the shaker after the screening of two kinds of stones, meet the size of the stone crusher feed into the crusher sand, another part of the feed back into the small break.
 
Sand stones are made into part of sand, sand Jingxi machine (optional) cleaning products made of sand, the other part into the Sand again broken.

Performance of production lines introduced

Sand Production Line Features and Benefits

First, the investment capacity of only the same general lines of 1/**1/5.
Second, production costs per ton of sand is only 1/**1/4 conventional production line. Third, the high degree of automation of production, production personnel for the class 3 or less. Fourth, the investment recovery period is short, usually 3 months payback. Sand Production Line high degree of automation, low running costs, break rate, energy saving, large output, less pollution, easy maintenance, the mechanism of production of construction sand sand meet the national standard, uniform particle size, grain shape is good, level with the rationale.

Sand production line up and running in the Handling Precautions

Ready to work, the order should be required to operate the car.
Start the main motor control cabinet should pay attention to the meter, after ****0s after the start peak current, the current will be reduced to the normal operating current values. In the normal course of operation, the current should also pay attention longer than the specified value.

Normal operation after the jaw crusher, you can start feeding machine, and according to the size of the block material and the functioning of the jaw crusher, adjust feeder to change the feed switch with volume. Generally, the accumulation of material in the crushing chamber height of the crushing chamber height to more than 2 / 3. Expected diameter of preferably not more than block the inlet width of *0% **0%, then the production capacity jaw crusher highest.

When the material block is larger, it will cause congestion, affecting the normal production. To prevent metal objects (such as the shovel teeth, track shoe, drill, etc.) into the jaw crusher, to avoid damage to the machine, when they are through the jaw crusher, the next job should immediately notify the operator promptly removed to prevent the second level broken system caused the accident. When electrical equipment automatically after tripping, if unexplained, non-forced continuous start. Found in the inspection tour sound machine must stop the fault is not normal, you should immediately stop feeding stagnant, the material to be broken in all the discharge chamber, and then stop the main motor, cut off the power to examine and handle.