Product Description

 
Medium and Low Temperature Curing Agent C**6E

The cured silicone by this agent are characterized non-toxic, odourless, no migration good anti-yellowing and weather fastness. Widely applied to high quality required and food grade silicone products. Silicone raw material should be cured at high temperature(**0℃).
Note: This agent is an inflammable and volatile liquid, Please watch out during work time.

Component:
1、Anti-Yellowing Agent 2、peroxide 3、polysiloxane

Physical Properties (Tested by KE***1U Gel)
Appearance: Transparent
Specific Gravity(g/cm³)（*3℃） 0.9~1.0
Hardness(ShoreA) *9~*1
Tensile Strength(Mpa) *0~*3
Elongation(%): **0~**0
Cracking resistance(KN/m) *4~*7
Compression Set %(**0℃/*2h) ≤5

Method of Application：
Curing Temperature **0℃*5min
Application ratio: 1.0~1.2%

This agent must be add by many time with a small quantity. If not, fewer electrostatic spark and over heat from barrel will cause material burning during the mixing time, The fire can be put out by foam extinguisher.

Notes:
1. Avoid to contact with rust, heavy metal compound, metal salt, drying agent etc.
2. This high vapour pressure agent is easy to volatilize. Please sealed stored on free time.
3. The mixed silicone should be used up within *2 hours. If not, the curing time will be longer than before.

Storage and Shelf Life：
Keep in dark and ventilate place,away from light and fire.Storage for 6months below *5℃ without open.

Packing：
*0KG/Bottle