thyristor power regulator scr power regulator PRSCR-LA

Product Description

Specifications

Linear phase shift control circuit
Modularized
Miniaturized, simple installation and wire connection
Vacuum welding.

Thyristor Power Regulator

reactive power regulator dc power regulated adaptor AYSCRLA

Product Features

{C}u     {C}Multipurpose LED indication for working condition

{C}u     {C}With automatic protective function, builtin fast fuse.

{C}u     {C}Adjustable for maximum and minimum output.

{C}u     {C}Linear phaseshift control circuit, with good stability performance, high precision.

{C}u     {C}Modularized, high voltage resistant, more safe and reliable.

reactive power regulator dc power regulated adaptor AYSCRLA

Technical Parameters

{C}u     {C}Rated Voltage: Threephase **0VAC（3phase 4wire）

{C}u     {C}Rated Current:*5A, *0A

{C}u     {C}Operation Frequency:*0Hz/*0Hz

{C}u     {C}Output mode: phase output

{C}u     {C}Control Signal:**0mA, *5VDC, **0VDC

{C}u     {C}Use environment: Less than *5, humidity less than *0% RH

reactive power regulator dc power regulated adaptor AYSCRLA

Product Model

reactive power regulator dc power regulated adaptor AYSCRLA

Operation Warning

1. The main circuit adopts threephase fourwire without requirement for phase sequence.
2. For SCR is a product with a high current, please keep in mind that terminals of R,S,T and U,V,W be locked tightly, or SCR will be burned by terminals’ heating.
3. When Y connection is used for threephase load, the center of Y should be connected with zero line, if not so, relative equilibrium of the threephase is required.
4. During the use of module, when the load power is more than *5KW, it's best to be equipped with proper radiator, and heat conducting silicon grease should be coated between radiator and SCR backboard with wind cooling.
5.  

Module protection: Please use semiconductive fast fuse for load over current.

Remark: When the working power is more than *5KW,please keep in mind that the radiator should be  used  frequently.