Product Description

UL SAA, IP*5 *0w Led High Bay Light- **0lm/w, Copper Heat pipe, Meanwell Driver

Specification:



Item Number: LY-HBL**0W-Z*5A / LY-HBL**0W-Z**0A



Power: *0W



Power Factor: more than0.*7



Input Voltage: AC *****5V



Frequency Range: *0Hz / *0Hz



Color Rendering Index: more than0. *5



Beam Angle: *5 degree or **0 degree



Color Temperature: ********0K  or ********0K



Luminous Efficiency: **0 lm/w



Lamp Lumen Output : ***0 lm



LED  Brand: CREE XTE



Power Supply Brand : MEAN-WELL HLG***0H**6A



IP Grade IP*5



Warranty **5 years



Contact: info (at) liangyangtech (dot) com



Application:



1. Factory   2. warehouse  

                   

3. workshop   4. storehouse  

                   

5. hangar   6. gym, stadium, exhibition hall 

                   

7. gas station, toll station 

                   

8. Parking garage  9. mall   etc.

 

Aprication:



1. Factory   2. warehouse  

                   

3. workshop   4. storehouse  

                   

5. hangar   6. gym, stadium, exhibition hall 

                   

7. gas station, toll station 

                   

8. Parking garage  9. mall   etc.

CE(EMC/LVD), RoHS, FCC, C-tick, SAA available.

Contact: sales (at) liangyangtech (dot) com

Attention:



1 It is forbidden to squeeze the top of the lamp, so as not to damage



thelamp shade.

2 Yellow green line to protect the earth, the rest two for ac power

cord.

3  When installation, hanging ring must be tight, in case lead to the



lampbody fall off

4 Because this product uses the heat pipe thermal conductivity, so it



isstrictly prohibited collision fall

5     When installing a lampshade, hang up the screws on the



compositealuminum plate suspended within **3 mm

6     Install the lamp shade on the aluminum plate, screw



correspondingwith hole , then clockwise rotating lamp shade, Let the



nut into thechimney hole and lock it

7 As LED high bay use heat pipe technology , lamp must be hang

perpendicular to the ground, deflection Angle is not greater than *5

degrees. the wire rope on heat sink is used to protect lamp body, to

prevent fall off. The rope must be connected to the fixed building can

bearing, to avoid lamp body  fall off lead to goods damaged or



personnelinjury