VP-TDM**0E is a new
generation analog card with interchangeable FXS_**0 and
FXO_**0 modules. It can eliminate the requirement for separate
channel banks or access gateways.
VD-TDM**0E*2U contains
4 module banks. Each bank supports one analog interface. The module
banks may be filled with up to FXO_**0 or FXS_**0 modules enabling
the creation of any combination of ports. Scaling of an analog card
solution is accomplished by simply adding additional
cards.
VL-TDM**0E works
with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®,
Yate™ and IPPBX/IVR projects as well as other Open Source and
proprietary PBX, Switch, IVR, and VoIP gateway
applications.
Main Features:
1 High security: It adopt tertiary
thunder preventing technology, can prevent the thunder and
lightning from striking effectively.
2 No additional power connector or
supplier is required for the operation of FXS modules, reduced the
line wave of the power, has improved the voice
quality.
3 World Wide Usable: Configurable line
interface to meet global telephone line interface
requirements.
4 The PCI plug is based on PCI Express
1X. User could choose any of combinations of FXO_**0 or FXS_**0
modules according to customers requirements.
5 *2 bit bus master DMA data exchanges across
PCI Express interface at **0Mbytes/sec for minimum host processor
intervention.
6 The high stability firmware is
exported / imported with DMA data exchange, so it accelerated and
reduced CPU load greatly. Under the environment of the same
hardware, CPU rate of utilization is equal to CPU rate of
utilization of using 4 port analog card.
7 It supports all the functions of
Asterisk PBX systems needed.
8 Exchangeable with Digium modules: It
is mixable with X**0M/S**0M of Digium
9 Humanization is designed: The module
socket that should be nipped is all adopted and stuck to one slice
of sockets, can prevent stabing users finger
effectively.
New
function:
1 Easy to install , using way
is same as DIGIUM Asterisk card
2 If use
Trixbox/Elastix/Freeiris2 IPPBX software, it can automatic
recognition our cards, dont need to install any
drivers.
3 for
2U classis high
Product Spotlight
TDM**0E is
a new analog card. It can be used for connecting analog telephones
and analog POTS lines through a PC. It delivers the superior voice
quality on both FXO and FXS interfaces in all 4
ports.
· Adjustable Interrupt Routing
Design
· Interrupts Frequency
Adjustment
· Up to 4 Simultaneous PSTN Calls
(Per PCI Slot)
· Compatible with All Commercially
Available Motherboards
· *-Month No Question Asked Return
Policy
· Lifetime Warranty
Target Applications
· Channel Bank Replacement /
Alternative
· Small Office Home Office (SOHO)
applications
· Small and Medium Business (SMB)
applications
· Gateway Termination to analog
telephones/lines
Services and Features
· Caller ID and Call Waiting Caller
ID
· ADSI Telephones
· Loopstart Signaling
Support
Technical Specifications
· Up to 4 ports through a combination
of FXS_**0 and FXO_**0 modules
· Full-length analog
card
· Up to 1 quad FXS or FXO
modules
· RJ*5 connector
· **-bit *3MHz PCI-E and fully PCI-E
compliant, compatible with all commercially available motherboards,
and proper sharing of PCI interrupts
· *2 bit bus master DMA data exchanges
across PCI interface at **2 Mbytes/sec
· Autosense compatibility with 5 V and
3.3 V PCI busses compatible
· Power: 8.*1W Minimum, *8.*4W Maximum
at 3.3 V or 5 V.
· Operation temperature: 0°C to *0
°C
· Storage temperature: **0°C to
**5°C
Operating Systems
· Linux (all versions, releases and
distributions from 1.0 up)
Minimum Hardware
Requirement
· ***-Mhz Pentium
III
· **8MB RAM
· Available PCI Slot
Products Size: *6cm*7cm