• Place of Origin: Guangdong, China (Mainland)
• Brand Name: YUKA
• Model Number: WS**-WS***0
• Type: Air Filter
• Description: Gas water separators for air dry
• Replace brand: Domnickhunter
• Made way: Die casting
• Housing Materials: Aluminium Alloy
• Vane: Plastic
• Connection: Screw
• Max.working pressure: 1.6Mpa
• Color: Red/black
• Highest Working Temperature: *0℃
• Lowest Working Temperature: 1.5℃

WS series Water Separators introduction

Water separator is one of purification products without elements which is used to before air filter protect coalescing filters against bulk liquid contamination ,where excessive cooling takes place in air receivers and distribution piping.

Technicaldata

Aluminium alloy die-cast housings with long time use.

Keep *9%separation effect.

Attach parts drain ,liquid mirror,manual drain.The max working pressure:1.6Mpa.

The max.temperature is*0°C.

The lowest temperature is 1.5°C.

Differential pressure is 0.**7Mpa

Anti-corrosion treament

International Certification Approva

Water Separators WorkingPrinciple

a.Wet air enters the inlet port and is directed into the separator module fixed turning vanes causing the air to spin inside the vessel and then change direction as it passes the impinger.

b.A vortex is then created which narrows and intensifies as it reaches the lower part of the separator.

c.Bulk liquid is therefore removed from the air stream due to a combination of:

Directional changes of the air stream.Velocity changes. Centrifugal action of the vortex.

As the vortex reaches the bottom of the separator

module, air is forced through the centre of the vortex.

Aerospace turning vanes located in the outlet of the separator module now turn an inefficient

corner into a number of more efficient corners to reduce turbulence, minimise pressure loss and therefore operational costs

Product Selection

Below flows are for operation at 7 barg(**0psigwith reference to*0°C.For other pressure,please refer to the correction factors

Manufacture process: