• Place of Origin: Guangdong, China (Mainland)
• Brand Name: YUKA
• Model Number: WS**0
• Type: Air Filter
• Description: Water separators for air dryers
• Replace brand: Domnickhunter
• Made way: Die-casting
• Housing materials: Aluminium alloy
• Connection: Screw
• Vane: Plastic
• Max.Pressure: 1.6Mpa
• Color: Red/black
• Lowest Working Temperature: 1.5℃
• Highest Working Temperatture: *0℃

WS series Water Separators introduction

Water separator is one of purification products without elements which is used to before air filter protect coalescing filters against bulk liquid contamination ,where excessive cooling takes place in air receivers and distribution piping.

Technicaldata

• Aluminium alloy die-cast housings with long time use.
• Keep *9%separation effect.
• Attach parts drain ,liquid mirror,manual drain.
• The max working pressure:1.6Mpa.
• The max.temperature is*0°C.
  
  
• The lowest temperature is 1.5°C.
• Differential pressure is 0.**7Mpa
• Anti-corrosion treament
• International Certification Approva

Water Separators WorkingPrinciple

a.Wet air enters the inlet port and is directed into the separator module fixed turning vanes causing theair to spin inside the vessel and then change direction as it passes the impinger.

b.A vortex is then created which narrows and intensifies as it reaches the lower part of theseparator.

c.Bulk liquid is therefore removed from the air stream due to a combination of:

Directional changes of the air stream.Velocity changes. Centrifugal action of the vortex.

As the vortex reaches the bottom of the separator

module, air is forced through the centre of the vortex.

Aerospace turning vanes located in the outlet of the separator module now turn an inefficient

corner into a number of more efficient corners to reduce turbulence, minimise pressure loss andtherefore operational costs

Product Selection