Foshan Hong Jia Machinery Co., Ltd

Model No. JB1400 Composed of hydraulic loading coil car, hydraulic decoiler, pinch rollers, hydraulic shear, looping pit & bridge, side guider, slitt

Manual expansion decoiler Main parts: welded steel structure, four steel leaves, wedge sliding base, mandrel, side panel, bearing, bearing base, etc

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.5 ~ 6.0 mm (Max.) (3) Width: 1300 mm. (4) Inside diameter 508

bakelite bar is used to stripe strips from cutting blades. Popular for thinner material. Any widths, any length avaible It can protect surface of sl

(1) Raw material: Carbon steel coils (2) Thickness: 0.3 ~ 2.0 mm (Max.) (3) Width: 600 mm. (4) Inside diameter of mother coil: 508 mm (5) Outside

Slitting blades are very important for performance of slitting lines. Our factory adoptsT10, 6CrW2Si, Cr12MoV, LD, H13, W18Cr4V, or other high speed s

Sliiter spacer is very importat for slitting machine. It is key for width preicsion. It is made from 65mn or 45# steel. Heat treatment, blacken treate

Sliiter spacer is very importat for slitting machine. It is key for width preicsion. It is made from 65mn or 45# steel. Heat treatment, blacken treate

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.5 ~ 6.0 mm (Max.) (3) Width: 400 mm. (4) Inside diameter 508 mm (5

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.5 ~ 6.0 mm (Max.) (3) Width: 400 mm. (4) Inside diameter 508 mm (5

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.3 ~ 3.0 mm (Max.) (3) Width: 1300 mm. (4) Inside diameter 508 mm (

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.3 ~ 3.0 mm (Max.) (3) Width: 1300 mm. (4) Inside diameter 508 mm (

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.3 ~ 3.0 mm (Max.) (3) Width: 1300 mm. (4) Inside diameter 508 mm (

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.3 ~ 3.0 mm (Max.) (3) Width: 1300 mm. (4) Inside diameter 508 mm (

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.3 ~ 3.0 mm (Max.) (3) Width: 1300 mm. (4) Inside diameter 508 mm (

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.5 ~ 3.0 mm (Max.) (3) Width: 800 mm. (4) Inside diameter 508 mm (5

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.5 ~ 3.0 mm (Max.) (3) Width: 800 mm. (4) Inside diameter 508 mm (5

1) Specification of material: (1) Raw material: Carbon steel coils (2) Thickness: 0.5 ~ 3.0 mm (Max.) (3) Width: 800 mm. (4) Inside diameter 508 mm (5

Composed of loadingcoil car, hydraulic decoiler, slitter, tension station, recoiler and unloading coil caronly 1) Specification of material: (1) Raw

Composed of loadingcoil car, hydraulic decoiler, slitter, tension station, recoiler and unloading coil caronly 1) Specification of material: (1) Raw

Composed of loadingcoil car, hydraulic decoiler, slitter, tension station, recoiler and unloading coil caronly 1) Specification of material: (1) Raw

Composed of loadingcoil car, hydraulic decoiler, slitter, tension station, recoiler and unloading coil caronly 1) Specification of material: (1) Raw

Composed of loadingcoil car, hydraulic decoiler, slitter, tension station, recoiler and unloading coil caronly 1) Specification of material: (1) Raw

Composed of hydraulic decoiler, slitter, tension station and recoiler only 1) Specification of material: (1) Raw material: Carbon steel coils (2) T

Composed of hydraulic decoiler, slitter, tension station and recoiler only 1) Specification of material: (1) Raw material: Carbon steel coils (2) T

Slitting blades are very important for performance of slitting lines. Our factory adopts T10, 6CrW2Si, Cr12MoV, LD, H13, W18Cr4V, or other high speed

Slitting blades are very important for performance of slitting lines. it can be made from T10, 6CrW2Si, Cr12MoV, LD, H13, W18Cr4V, or other high speed

Slitting blades are very important for performance of slitting lines. it can be made from T10, 6CrW2Si, Cr12MoV, LD, H13, W18Cr4V, or other high speed

Slitting blades are very important for performance of slitting lines. it can be made from T10, 6CrW2Si, Cr12MoV, LD, H13, W18Cr4V, or other high speed