CITICHL HEAVY INDUSTRIES CO.,LTD

The characteristics and performance of the above products: using the advanced method of composite Carbon and non-Carbon, which make the refractoriness

Deoxidizer is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound deoxidizer ac

Ladle gunning mix with high grade magnesia, spinel, special binder and additive. It is characterized by good adhesion, high bonding strength, low rebo

Desulfurizer powder is the desulfurization dregs serious developed by our company for adapting out furnace refining, which not need extra expenses of

Steel flow initiator / drainage agent is a kind of ladle slid nozzle filler sand which is successfully developed by our company in recent years, resul

The characteristics and performance of the above products: using the advanced method of composite Carbon and non-Carbon, which make the refractoriness

Furnace bottom tapping hole fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by our comp

Furnace bottom tapping hole joint fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by ou

Square billet continuous casting is rather complicated, which involved in steel types, section and casing speed. casting mold covering slag is designe

refractory dry ramming mass is characterized by high corrosion and erosion resistance against molten steel and slag, dense sintered layer, long servic

dry ramming mass is characterized by high corrosion and erosion resistance against molten steel and slag, dense sintered layer, long service life, low

Desoxidant/ deoxidizer is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound d

refractory Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction furna

Tundish dry vibration mixes is mainly used for tundish lining, which is the 3rd generation of high-tech product following insulation board and tundish

Steel making refining slag is a new auxiliary material of steel making that developed by our company to meet the requirement of low-sulphurstel. I t w

The characteristics and performance of theRefractory cover agent: using the advanced method of composite Carbon and non-Carbon, which make the refract

The characteristics and performance of covering flux: using the advanced method of composite Carbon and non-Carbon, which make the refractoriness incr

The characteristics and performance of refractory cover flux: using the advanced method of composite Carbon and non-Carbon, which make the refractorin

carbon agent / Recarburizer Physical and chemical index: Brand items index ZTJ85 ZTJ90 ZTJ93 Fixed C% >=85 >=90 >=93 H2O%

Furnace bottom tapping hole fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by our comp

Ladle gunning mix with high grade magnesia, spinel, special binder and additive. It is characterized by good adhesion, high bonding strength, low rebo

Deoxidiser / Deoxidizer is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound

Deoxidizer /deoxidizing agent is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the com

Refractory Deoxidizer is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound de

Compound Deoxidizer is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound deox

Oxygen absorber of the deoxidizer is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the

Steel making deoxidizer is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound

The calcium based deoxidizer is ideal material to improve the operation of the furnace after deoxygenation , when smelting carbon steel, and low carbo

The calcium based deoxidizer is ideal material to improve the operation of the furnace after deoxygenation , when smelting carbon steel, and low carbo

Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw mater

Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw mater

Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw mater

Black silicon carbide powder is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main ra

Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw mater

The characteristics and performance of the cover agent: using the advanced method of composite Carbon and non-Carbon, which make the refractoriness in

Refractory covering agent characteristics and performance: using the advanced method of composite Carbon and non-Carbon, which make the refractoriness

The characteristics and performance of the cover agent: using the advanced method of composite Carbon and non-Carbon, which make the refractoriness in

Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction furnace coils. C

Red mud/ Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction furnace

filler grout/ Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction fu