Shenzhen Gangwenjing Communications Power Co., Ltd

As a separated splitter, it can be installed in the FDT, closure, FAT etc for splitting. There are pigta

Zirconia ceramic ferrule and metal retainer; mechanical contact of fiber; coupling nut. The insertion loss

Main Features Metal shell, one end is FC retainer, the other end is SC retainer. Convenient and rel

Zirconia ceramic ferrule and metal housing; mechanical contact of fiber. The insertion loss is less tha

2x2 Fiber Optic Splitter Optical coupler is an optical device that combines or splits power from optical fibe

Optical coupler is an optical device that combines or splits power from optical fibers. Optical splitter divid

Both ends of pigtail are jumper, Low insertion loss. Good hardiness, Good conversion perfo

Main Features Push-pull connection mode for convenient operation. Rectangle structure; Engineering

Separate voice signal and ADSL digital signal from telephone signal Protect voice signal and ADSL digit

Completely comply with IEC *******3(FC connector). Completely comply with IEC ******4(SC connector).

Sealing for inlet/outlet is achieved by tightening nut, easy and convenient for installation, without repla

Design for bi-directional network behind optical receiver. Best effect if use at 1km network. Adopt High gain

Adapter loss(insertion, interchange, repetition) 0.3dB Return loss PC *0 dB APC *5 dB. Plug in a

Adapter loss (insertion, interchange, repetition) 0.3dB. Return loss PC *5 dB APC *5 dB. Push-pu

Main Features One end is FC optical fiber connector plug, the other end is the jumper of SC optical fiber

Temperature 0 ~ *0 degree Relative Humidity *5% (**0degree) Atmospheric pressure *0 ~ **6KPa Exce

Capacity: *-fiber, **-fiber, **-fiber With straight through and branch function Compatible for U type cablin

With optical splitter unit inside. With splicing unit inside. Applicable to large-capacity optical

Indoor wall-mounted installation. Standard **-fiber splicing tray, which is convenient for off-frame oper