Description
*The bodies and the covers of the bearings of Kem-P High Frequency
vibration motors are GGG**0 SPHERO casting. It's break-proof and
also has great power of endurance against corrosion for vibration
applications.
* The bearing bushings are sintered. The bearing bushings will not
corrode and there will not be bearing malfunctions.
* Kem-P High Frequency vibration motors are being equipped with Nj
Series bearings which have got high level loading capacity.
* The bearings are equipped with oil covers and oil seals to
preserve the oil, so operations with lacking of oil will be
prevent.
* The balance covering, bearing and connector covers have been
isolated perfectly with o-ring. It will not effect from water,
humidity (fume), dust and the natural conditions.
* The inputs of the connector are protected by spiral compression
glands to prevent from malfunctions like cable breaking or laxity
ext.
* The weight of the external vibration motors are fixed with stool,
stay bolt screw and cleat.
*Connector (energy busbars) are fixed with epoxy resin to avoid
from heavy vibration.
-Mounted connenctions are flange and footed.
-Technical Information Details for PSV *0/1;
Centrifugal Force : *5,**0 KN
Input Power : 0,*2 kW
Nominal Current : *5 A
Voltage : *2/*8 V (Three Phase)
Frequency : **0Hz
Cycle Revol : ****0 Rpm
Weight : *7 Kg
Material : GGG**0 SPHERO casting
Note: For further information about our motors you
can look at our technical brochure on our official
website.
