Description
Outline
WASP-XM Series Pump-priming Portable Gas Detector Is a continuous
monitoring of a variety of single gas detection equipment. This
product is suitable for environmental monitoring, industrial
production and other harmful gases working environment, which can
effectively protect the health and safety of staff is not
compromised.
Main Feature
■ Smart probe design, calibration and
■ Maintenance more convenient in the future;
■ Fault, Warning, operator error, alarm will be smart tips;
■ Built-in CF calibration coefficients (VOC measurements only
valid);
■ With audible alarm, visual alarm function, the status bar also
displays alarm status;
■ Full-color 3.*-inch TFT screen, color LCD display and
intuitive;
■ Can be both digital and curve display of gas concentration in two
ways;
■ With USB communication port, you can speed ***0 bytes to
communicate directly with the computer;
■ With test record function, can store a month\'s measurement data
and instrument or computer can view the data;
■ With alarm recording function, you can record the last four times
the alarm time and type;
■ With calibration record; can record the last four times the size
of the calibration time span;
■ High-capacity lithium battery-powered, rechargeable, low battery
automatic shutdown;
■ Can be set high reported, underreporting, TWA, STEL, shutdown
time, pump speed, etc.;
Technical Parameter
Power supply: Lithium battery (4.2V/***0mAh)
Operating Current: normal current: ≤ **0mA; Alarm current: ≤
**0mA
3、Operating environment: Temperature: **0 ℃ - *0 ℃
Relative Humidity: *5% - *5%,
non-condensing
4、Storage environment: Temperature: **0 ℃ - *0 ℃
Relative humidity: ≤ *0%, no
condensation
Housing material: PC
Dimensions: **8* *4 * *0.5mm
Installation: Handheld / Stand-in
Weight: 0.*5 kg
Applications
They are widely used in petroleum chemical industry, power
industry, water treatment industry, the tobacco industry,
pharmaceutical industry, food industry, coal, metallurgy, municipal
gas, environmental monitoring and other occasions on-site
testing.
Can be measured gas species: CH2O, TVOC, CO, H2S, NO2, NO, SO2,
CL2, NH3, H2, PH3, O3, F2, HF, HCL, HBR, C2H4O, COCL2, SIH4, CLO2,
HCN, C2H4, SF6 and combustible gases.
