Description

Linux Operation System
ARM 9G*0 **0MHz CPU, embedded Linux OS to support faster data transmission.
 
Intelligent Operation
l  Equipped with smart speaker guiding during the whole operation. Voice assistance can help you master V*0 operation quickly. Language can be customized.
l  Industrial LED display screen on its front control panel to show all information and status of the work.
l  Many one-button operations make your work easily. Base setup by one button can choose base coordinate from base list automatically.
l  Automatic recording system log makes receiver diagnosis easy.
 
 
RINEX Storage
The static data can be saved directly in RINEX format. The V*0 is fully compatible with other brands receivers.
 
Quick Upgrade
Just copy the updated firmware to the V*0, then restart to finish the upgrade in a few seconds.
 
 
Multi Constellation Tracking
l  **0 tracking channels.
l  Supports GPS, GLONASS, GALILEO, BDS, SBAS.
l  Built-in NGS Approved Antenna.
 
 
High Power Transceiver UHF Radio
l  The transceiver UHF radio enables the working mode switchable between base and rover.
l  5 watts (Max.) HI-TARGET internal UHF radio and 2 watts (Max.)Pacific Crest micro XDL internal UHF radio are optional
l  Pacific Crest TrimTalk© internal UHF radio is compatible with other RTK.
 
 
Seamlessly Operation in CORS System
l  Built-in GPRS/GSM/3G module makes V*0 work perfectly with network RTK positioning.
 
 
Long-life Battery
l  Powered by ***0mAh Li-Ion battery.
l  Static working time *3 - *5 hours
l  RTK Rover(UHF/GPRS/3G) working time *0 - *2 hours
l  RTK Base working time 8 - *0 hours
 
Rugged Design, IP*7
l  IP*7 dust/water protection.
l  Withstands 3 meters natural fall onto concrete.
l  Rapidly track and perfectly avoid or lessen obstruction and multipath effect to ensure superior positioning capability.