Description
Feed pellet mill also called pellet feed machine,
pellet feed forming machine, can process corn, soybean, straw,
grass, rice husk, etc. Widely used for big, middle, small scale
aquaculture, grain feed process plant, livestock farms and poultry
farms using.
Feed pellet machine commissioning process:
1.First, you should know
pellet feed production
line working process and know the working process each
machine main function;
2.Before commissioning the machine, you should check the machine
working condition one by one and konw all
pellet
machine mold hold and the matched crusher crushing size,
raw material material should with small size, but shouldn't too
small, the material size should better with the following
distribution: lesss than 1% material size above 3.*5mm, less than
5% material size above 2.0mm, about *0% material size above 1.0mm,
about *0% material size above 0.5mm, about *4% material size above
0.*5mm, not less than *0% mateiral size below 0.*5mm, etc.
3.Before commissioning, you should clean silo first, the debris
include when install left stone block and weld slag, etc.
4.Before commissioning, you should check whether used steam
pipeline system with good pressure reduce function and hydrophobic
function to make sure when pelleting required enough drying steam
media and make sure after adjust pressure reduce valve, there are
still with 0.****0.4MPA steam.
5.Before starting the
small pellet mill, you
should adjust roller and ring die distance at the range of
0.**0.4mm.
6.When start the
feed pellet mill for sale
working, the feeding capacity should gradually increase.
