Description
Signal Isolated Transmitter (*-digit analog input
display type)
Model: SIT*5AID
Features
■ Measuring AC/DC voltage, current, potentiometer, resistance,
transmitter, PT***0, load cell and other signals are available
■ Highlight 0.**-digit LED display, decimal point can be set by
user
■ Surge test of AC ***0V/min between any 2 of input / output /
power
■ Output corresponding range can be set by user
■ Case material adopts flameproof PC for high stability and
security
Main Specifications
▼Size
**1.1 x *0 mm
▼Installation type
Socket／Plug-in
▼Operating ambient temp.
*0°C to **0°C
▼Storage temperature
**0°C to *0°C
▼Ambient humidity
****0% R.H. (non-condensing)
▼Storage temperature
****0% R.H. (non-condensing)
▼Temperature coefficient
**0ppm/℃ (0~*0℃)
▼Temperature *
&*;±*%*/*@********************ng>Other Specifications
▼Accuracy
For DC／potentiometer／resistor／PT***0／load cell: ±0.1% F.S.,
±*-digit
For AC: ±0.2%F.S., ±*-digit
▼Display
Highlight red LED
Type-high *0.*6mm (0.4)
▼Sampling time
*6 cycles/sec.
▼Display range
*****9~****9
Zero adjustment range: ±***9
Span adjustment range: ±***9
▼Overload display
doFL / ioFL or -doFl / -ioFL
▼Polarity indication
Display "-" when input signal is opposite
▼Parameter setting
Push buttons
▼Data memory mode
EEPROM
▼Output ripple
≦±0.1%F.S.
▼Isolation
Input／output／power／case
▼Power supply
AC/DC **0~**0V；
AC/DC *2~*0V
▼Analog output
Resolution: *5 bit
Response time: <**0ms (***0%)
Output capacity:
Voltage output <*0ma
Current output <*0V
▼Surge test
2KVac／min. (Input／Power)
▼Insulation resistance
>**0MΩ with **0Vdc
▼Input impedance
Voltage:
>2V: *0KΩ/V
≦2V: >**0MΩ
Current:
≧0.2A: **0mV
＜0.2A: 1V
▼Other requests (Option)
Third party notarized documents
Inspection report
