KOSED-15
Product description
This equipment is used to separate and recover the oil contained in
the water when an oil spill accident occurs at sea. It is an
electric and electronic skimmer that breaks away from the hydraulic
drive method of most existing skimmers. Driven by battery (DC48V)
or converter (AC220V → DC48V conversion) depending on option
(Operation is also possible using a 3kw small generator) It weighs
5/1 compared to hydraulic equipment and is characterized by safe
and convenient maintenance with a low difficulty operation method
by full-function remote control. In particular, since engine
hydraulic power packs and hydraulic hoses are not required, the
health and safety of workers due to exhaust fumes can be improved,
unintentional secondary contamination due to bursting hydraulic
lines can be prevented, and dispatch time in urgent situations such
as oil spills can be dramatically reduced. It is a device that can
be shortened to.
Overview
A disc-type electric skimmer equipped with a self-navigation
device, suitable for recovering light oil.
Operating principle
Put the main body into the contaminated site, put oil on the
rotating disk, separate it with a scraper, and collect it using the
centrifugal pump installed on the lower part of the
head.
Detailed specifications
Recoverable viscosity |
4,000 cst or less |
Type |
Adsorption (disc) |
Recovery capacity |
15㎘/h |
Manufacturer (Nationality) |
Korea Marine Environment Corporation (KOEM), Seongdong Ocean Tech,
Inc. (Korea) |
Configuration details
Division |
Specifications and Features |
SKIMMER HEAD |
L × W × H |
72×90×58(㎝) |
Weight |
48㎏ |
Number of disks |
8ea |
Material |
ABS, Aluminum, Stainless |
Pump |
1 Centrifugal pump built-in |
Self-defense device |
2Units, 1.5knot |
Recommended environment(temperature) |
0 ~ 50℃ |
Battery |
L × W × H |
19.5×40.5×23(㎝) |
Weight |
14kg |
Output power |
Output: DC48V |
Usage time |
4~6hours |
Charging time and recommended temperature |
6~8hours (Discharge->Fully charged), 0 ~ 45℃ |
Recommended environment(temperature) |
-20℃ ~ 50℃ |
Remote controller |
Model |
HBC(社) FST727 Spectrum B |
Manual Remote controller |
L × W × H |
16×8×6(㎝) |
Receiveable distance |
Maximum 150(m) |
HOSE |
Hose standard |
1″×30m×1set |
PUMP |
Maximum vertical lift |
20(m) |
Device Description
【Electric drive type skimmer】
KOSED-15 breaks away from the hydraulic drive method that
conventional skimmers have adhered to, and solves the problems of
existing hydraulic skimmers. It is an equipment that greatly
improves the convenience of workers by improving the inconveniences
that workers have experienced directly, such as lightening heavy
equipment, simplifying accessory equipment with complex
configurations, and improving the working environment. It was
developed to improve convenience.
【 Device Features 】
The oil transfer pump (BLDC electric pump) applied to KOSED-15 is
driven by direct supply of electricity from the power source, and
has a higher driving force than the hydraulic pump of the existing
hydraulic oil collector. This is the effect of simplifying the
driving process of the pump. The hydraulic pump of the existing oil
collector is operated through a process of 5 steps
(engine→hydraulic pump→hydraulic distributor→hydraulic motor→oil
transfer pump), whereas the electric pump of this technology Drive
energy loss can be prevented by directly using the power from the
battery for driving. This simplification of the process also has a
side effect of removing auxiliary materials (hydraulic control
unit, hydraulic line, etc.) installed inside the equipment, so that
it can be made smaller and lighter than existing pumps, so
high-efficiency work results can be expected.