Beijing SKE Technology Co., Ltd

Detection method: ISE (Ion Selective Electrode) Test indicators: the alkali content of concrete and raw materials, means the equivalent content of so

The instrument is useful for quality Inspection Company, site testing or sampling and laboratory center,

NJR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete.

Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three type

The NJMFD800C is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD and a host of new features to meet challenging inspectio

Testing building foundation piles by crosshole ultrasonic wave method . Inspecting concrete defects by ultrasonic method, such as uncompacted place,

Adopts the ISE (ion selective electrode) method rapidly to test the chlorine ion content of concrete, sandstone, admixture and the other water-soluble

It adopts the ISE (Ion Selective Electrode) method to rapidly test the water soluble chloride ion content of the inorganic material in room temperatur

It adopts the ISE (Ion Selective Electrode) method to rapidly test the water soluble chloride ion content of the inorganic material in room temperatur

It adopts the ISE (Ion Selective Electrode) method to rapidly test the water soluble chloride ion content of the inorganic material in room temperatur

According to DuraCrete unsteady electromigration test theory. Test indicators: Concrete chloride migration coefficient Detection method: Electromig

7inch color LCD with touchable intelligent control system, can work without the computer The LCD can display the temperature variation curve and moni

Adopt Wenner sensor array (50mm of spacing) to test concrete resistivity, the resistivity unit will be k cm).According to the different range of test

This instrument is recommended product of CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced pol

NJ225-S test hammer submit to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. Automatically calculate data and on site print test report.

NJR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete.

Adopts the half-cell potential method to test the rebar corrosion condition in the concrete structure; adopts the Wenner sensor (Spacing is 50mm) to t

NJCK-2 crack width measurement instrument a new professional concrete structure measurement instrument for the crack width and the microcosmic defects

Testing of building foundation piles by cross-hole sonic logging; Inspection of concrete defects by ultrasonic method, such as uncompacted, cellular,

The DJGW-2A apparatus is mainly used for testing concrete structures quality; locating the steel bars position and Measuring the rebars protecting thi

DJCS-05 crack depth measurement instrument adopt this geometrical between the diffraction angle and depth to realize high precision depth measurement

Select fine-grained strong magnetic substance in wet weak magnetic fields Remove the strong magnetic minerals from the non-magnetic ore Two type Mag

Telecommunication, Lasers and sensors, filter Wavelength Division Multiplexing Transmission System High tensile resistance and anti-electromagneti