Product Description

Product description: 
       LXC**0 generator controller uses **-bit microprocessor and embedded system control technology, precision measuring *6 parameters, *2 programmable s, *5 warning protection parameters, *5 programmable output of **1 configurable parameters . Of which **8 can be configured from the front panel. With LCD graphic display module can display various engine parameters and generator parameters. Was quickly promote the use in multiple areas, such as: small power plants, biogas power generation, oil and power, field engineering, factory, fire pumps, mobile base stations, and many other fields. Applies to gasoline, diesel, natural gas, biogas and other power equipment, many well-known domestic and foreign enterprises have been widely supporting applications. Completely replaced DSE7X0 controller. 
       LXC**0: for stand-alone automated, remotely controlled power signal generator set from the start and stop; 
       LXC**0: LXC**0 based on the increase in electricity consumption monitoring and mains / generator automatic switching control function (AMF), especially for stand-alone automated systems. 

Product performance and features: 
       LXC**0: for stand-alone automated, remotely controlled power signal generator set from the start and stop; 
       LXC**0: LXC**0 based on the increase in electricity consumption monitoring and mains / generator automatic switching control function (AMF), especially for stand-alone automated systems. Its main features are as follows: 
       1, using **-bit ARM microcontroller, hardware integration and high reliability is further enhanced; 
       2, the liquid crystal display LCD is **8x*4, with backlight, Chinese, English and other languages ​​optional interface operation, and can be on-site to choose, easy commissioning test machine; 
       3, with advanced networking features, via GSM mobile network and Internet connectivity, the network in any place can remotely monitor; 
       4, especially for the rental industry to provide the perfect solution for management: leasing out via PC remote management unit that monitors all operating parameters (oil pressure, water temperature, voltage, current, power, etc.), you can change the configuration at any time to protect the unit improperly applied, can record **0 detailed fault information, including: failure of key parameters of time, because, when the voltage, current, power, oil pressure, water temperature, etc., and ready to be uploaded to the monitoring machine. Another multi-level password management to facilitate the lease term management; 
       5, with SMS function, you can automatically send an alarm message to five phone numbers set the alarm when the generator set, you can also control the turbine generator set and access status via SMS; 
       6, with RS**5 communication interface, MODBUS protocol can be implemented using the "three remote" feature; 
       7, control and protection functions: diesel or natural gas generator set automatic start / stop switch on or off (ATS switch) and perfect protection fault display function; 
       8, parameter setting functions: allows the user to change settings on its parameters, and memory in the internal FLASH memory, when the system is powered down is not lost. Most of the parameters can be adjusted from the controller front panel, all parameters can be used to adjust the PC via RS**2 interface can also be used to adjust the PC via RS**5 interface; 
       9, a variety of temperature, pressure and oil level sensor curve can be used directly, and can customize the sensor curve; 
      *0, a variety of start conditions (speed sensors, hydraulic, power generation) optional; 
      *1, with a history of failure record, real time clock, timer switch (monthly / weekly / boot once a day and can set whether to load) function; 
      *2, mains overvoltage, undervoltage, over and under frequency, phase, reverse phase sequence function, power generation has overvoltage, undervoltage, over and under frequency, over-current, over-power, reverse power, phase , reverse phase sequence function; 
      *3, three fixed analog sensors (temperature, oil pressure, level); 
      *4, two programmable analog sensors can be set to a temperature or pressure or level sensors 
      *5, width (8 to *5) Power supply range VDC, able to adapt to different starting battery voltage environments; 
      *6,  pump unit can be used, but also can instruct the instrument to use (only indication, alarm, relay no action); 
      *7, small, extremely thin, delicate thin control box suitable for installation 
       Mains 
       Line voltage Uab, Ubc, Uca 
       Phase voltage Ua, Ub, Uc phase sequence 
       Frequency Hz 
       Generate electricity 
       Line voltage Uab, Ubc, Uca 
       Phase voltage Ua, Ub, Uc phase sequence 
       Frequency Hz 
       Load current IA, IB, IC 
       Phase and total active power kW 
       Phase and total reactive power kVar 
       Phase and total apparent power kVA 
       Phase and the average power factor PF 
       Cumulative power generation kWh, kVarh, kVAh 
 
       Temperature WT ° C / ° F to select Display 
       Oil Pressure OP kPa / Psi / Bar select Show 
       Fuel bit FL Unit:% 
       Speed ​​(SPD): RPM 
       Battery voltage VB Unit: V 
       Charger voltage VD Unit: V 
      HC timer can be accumulated *5,**5 hours 
      Cumulative boot times 
      The maximum cumulative ****5 times 

Specifications: 
    Operating voltage: DC8.0V to *5.0V (continued supply) 
    Power consumption: <3W (Standard Mode: ≤ 2W) 
    Input voltage: *2V AC - **0 V AC (PH-N) of *-phase *-wire 
*3V AC - **0 V AC (PH-N) of *-phase *-wire 
    Frequency: *0/*0HZ 
    Speed ​​sensor voltage Vpp: 1.0 - *0Vpp 
    Speed ​​Sensor Frequency: Maximum ****0HZ 
    Start Relay Output: *0Amp DC*8V 
    Programmable relay outputs: *0Amp DC*8V 
    Power switch programmable relay outputs: *0Amp **0VAC 
    Dimensions: **9mm x **6mm x *6mm 
    Hole size: **4mm x **0mm 
    Working temperature: (**5 ~ **0) ℃ humidity (*0 to *0)% 
    Storage conditions Temperature: (**5 ~ **0) ℃ 
    Secondary electric current sensors: 5A