Product Description

Product description: 
        LXC***0 power plant automation controller integrates a digital, intelligent and network techniques for single diesel generator automation and monitoring system, automatic start / stop, data measure and alarming and "three remote" (to be equipped RS**5 module) function. Controller with large-screen LCD display, Chinese, English, Spanish and Russian optional interface operation, simple operation, reliable operation. Achieve a precision measuring a variety of parameters, setpoint adjustment, and timing, threshold setting and other functions, the controller of all parameters can be adjusted from the front panel of the controller, or use a PC via USB, RS**2 interface programming, adjustment and monitoring. Its compact, simple wiring, high reliability, and can be widely used in various types of generators automation systems. 
 
 
Product performance and features: 
 
1 LCD LCD is **2 × *4, in four languages ​​(Chinese, English, Spanish, Russian) display, touch operation; 
 
2 is suitable for three-phase four-wire, single-phase two-wire, three-phase three-wire, two-phase three-wire (**0V/**0V) power *0Hz/*0Hz system; 
 
(3) collect and display mains / generator phase voltage, phase current, frequency, power parameters; 
 
4 mains overvoltage, undervoltage, phase function, power generation has overvoltage, undervoltage, over and under frequency, overcurrent function; 
 
5 various parameters sophisticated collection engine: coolant temperature, oil pressure, fuel quantity, the charger voltage, and depending on the setting for effective protection of the engine, to avoid accidental damage to the engine; 
 
6 control and protection functions: automatic diesel generator start / stop, sub-gate (ATS switch) and perfect fault protection functions; 
 
7 With ETS, idle speed control, preheat control, lifting speed control function, and are relay outputs; 
 
8 parameter setting: Allow user to change settings on its parameters will not be lost when the system is powered down, the controller of all parameters can be adjusted from the controller front panel, or by using a PC via a USB programming interface adjustments; 
 
9 a variety of temperature, pressure sensors can be used directly, and custom parameters; 
 
*0 variety of start conditions (speed sensors, hydraulic, power generation) optional; 
 
*1 W (8 to *5) Power supply range VDC, able to adapt to different starting battery voltage environments; 
 
*2. Modular design, flame retardant ABS housing, pluggable terminal blocks, embedded installation, compact, easy to install 

Specifications: 
       Operating voltage: DC8.0V continuous power supply to *5.0V 
       Total power consumption: <3W (Standby mode: ≤ 2W) 
       Alternator Voltage Input: *5V AC **0 V AC (phN) 
       Phase four-wire *5V AC **0 V AC (phN) 
       Two-phase three-wire *5V AC **0 V AC (phN) 
       Single-phase two-wire *0V AC **0 V AC (phph) 
       Three-phase three-wire 
       Alternator Frequency: *0 Hz / *0Hz 
       Speed ​​sensor voltage: 1.0 to *4V (rms) 
       Speed ​​sensor frequency: max ****0Hz 
       Start relay output: 5A DC*8V DC power output 
       Programmable relay output 1: 5A DC*8V DC power output 
       Programmable relay output 2: 5A DC*8V DC power output 
       Programmable relay output 3: 5A DC*8V DC power output 
       Programmable relay output 4: 5A AC**0V passive output 
       Programmable relay output 5: 5A AC**0V passive output 
       Dimensions: **3mm x **5mm x*1mm 
       Hole size: **0mm x *0mm 
       Current transformer secondary current: Rated: 5A 
       Working conditions: Temperature: (*5 ~ *0) ° C Humidity: (*0 ~ *3)% RH 
       Storage conditions: Temperature: (*0 ~ **0) ° C 
       Protection class: IP*5: when waterproof rubber ring between the controller and the control panel. 
                       IP*2: When there is no waterproof rubber ring between the controller and the control panel. 
       Dielectric strength: Object: Input / Output / Power 
                       Reference Standard: IEC*******2 
                       Test method: AC1.5Kv/1min leakage current 3mA 
      Weight: TBD