Product Description

Product description: 
      LXC***0: for stand-alone automated, remotely controlled power signal generator set from the start and stop; 
       LXC*3X0/LXC*1X0 series controller uses **-bit microprocessor and embedded system control technology, precision measuring *6 parameters, *2 programmable s, *5 warning protection parameters, *5 programmable output of **1 can be configured parameters. Of which **8 can be configured from the front panel. With LCD graphic display module can display various engine parameters and generator parameters. Was quickly promote the use in multiple areas, such as: small power plants, biogas power generation, oil and power, field engineering, factory, fire pumps, mobile base stations, and many other fields. Applies to gasoline, diesel, natural gas, biogas and other power equipment, many well-known domestic and foreign enterprises have been widely supporting applications. Completely replace DSE*1X0/*2X0 series controller. 
Product performance and features: 
      1, using **-bit ARM microcontroller, hardware integration and high reliability is further enhanced; 
      2, the liquid crystal display LCD is **8x*4, with backlight, Chinese, English and other languages ​​optional interface operation, and can be on-site to choose, easy commissioning test machine; 
      3, with advanced networking capabilities via GPRS mobile network and Internet connectivity, the network in any place can remotely monitor; 
      4, especially for the rental industry to provide the perfect solution for management: leasing out via PC remote management unit that monitors all operating parameters (oil pressure, water temperature, voltage, current, power, etc.), you can change the configuration at any time to protect the unit improperly applied, can record **0 detailed fault information, including: failure of key parameters of time, because, when the voltage, current, power, oil pressure, water temperature, etc., and ready to be uploaded to the monitoring machine. Another multi-level password management to facilitate the lease term management; 
      5, with RS**5 communication interface, MODBUS protocol can be implemented using the "three remote" feature; 
      6, control and protection functions: diesel or natural gas generator set automatic start / stop switch on or off (ATS switch) and perfect protection fault display function; 
      7, parameter setting functions: allows the user to change settings on its parameters, and memory in the internal FLASH memory, when the system is powered down is not lost. Most of the parameters can be adjusted from the front panel of the controller, all parameters can have SMS function, you can automatically send an alarm message to five phone numbers when you set the alarm generators, generator sets can also be controlled via SMS and access to electricity unit status; 
      8, using a PC via RS**2 interface adjustments can also be used to adjust the PC via RS**5 interface; 
      9, a variety of temperature, pressure and oil level sensor curve can be used directly, and can customize the sensor curve; 
     *0, a variety of start conditions (speed sensors, hydraulic, power generation) optional; 
     *1, with a history of failure record, real time clock, timer switch (monthly / weekly / boot once a day and can set whether to load) function; 
     *2, all outputs are relay outputs; 
     *3, mains overvoltage, undervoltage, over and under frequency, phase, reverse phase sequence function, power generation has overvoltage, undervoltage, over and under frequency, over-current, over-power, reverse power, phase , reverse phase sequence function; three fixed analog sensors (temperature, oil pressure, level); 
     *4, two programmable analog sensors can be set to a temperature or pressure or liquid level sensor; 
 
Specifications: 
      Operating voltage: DC8.0V continuous power supply to *5.0V 
      Total power consumption: <3W (Standby mode: ≤ 2W) 
      Alternator Voltage Input: *0V AC***0 V AC (ph-N) 3 phase 4 wire 
      Three-phase four-wire *0V AC***0 V AC (ph-ph) *-phase *-wire 
      Three-phase three-wire *0V AC***0 V AC (ph-N) 
      Single-phase two-wire *0V AC **0 V AC (ph-h) 
       Two-phase three-wire 
       Alternator Frequency: *0 Hz / *0Hz 
       Speed ​​sensor voltage: 1.0 to *0V (rms) 
       Speed ​​sensor frequency: max ****0Hz 
       Start relay output: *6Amp controller supply voltage output 
       Fuel Relay Output: *6Amp controller supply voltage output 
       Programmable relay outputs 1:*6 Amp controller supply voltage output 
       Programmable relay outputs 2:*6 Amp controller supply voltage output 
       Programmable relay outputs 3:*6 Amp controller supply voltage output 
       Programmable relay outputs 4:*6 Amp **0VAC passive output 
       Open relay programmable relay outputs 5:*6 Amp **0VAC passive output 
       Mains relay programmable relay output 6: *6Amp **0VAC passive output 
       Dimensions: **0mm x **2mm x*7mm 
       Hole size: **4mm x **0mm 
       Current transformer secondary current: Rated: 5A 
       Working conditions: Temperature: (*5 ~ *0) ° C Humidity: (*0 ~ *0)% RH 
       Storage conditions: Temperature: (**0 ~ **0) ° C 
       Protection class: IP*5: when waterproof rubber ring between the controller and the control panel. 
                       IP*2: When there is no waterproof rubber ring between the controller and the control panel. 
       Dielectric strength: Object: Input / Output / Power 
                      Reference Standard: IEC*******2 
                     Test method: AC1.5Kv/1min leakage current 3mA 
       Weight: 0.*0kg