Product Description

SFP Module Fiber Optical Transceiver *0G LR Dual Fiber *0km LC

Description
The YXF-PP-S*1L**0D is a high performance, cost effective modules, which is supporting up to
*0.***5Gbps, and transmission distance up to *0km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a laser driver and a ***0nm DFB laser. The receiver section consists of a PIN photodiode integrated with a transimpedance preamplifier (TIA) and a Limitting Amplifier. The module is hot pluggable into the **-pin connector. The high-speed electrical interface is base on low voltage logic, with nominal **0Ohms differential impedance and AC coupled in the module.

The optical output can be disabled by LVTTL logic high-level of TX_DIS. Transmit Fault
(Tx_Fault) is provided to indicate that the module transmitter has detected a fault condition related to laser operation or safety. Loss of signal (RX_LOS) output is provided to indicate the loss of an optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the *-wire SFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.


Features

• Up to *0 km transmission on SMF
• Up to*0.***5Gbps
• ***0nm DFB laser and PIN receiver
• Electronic Interface compliant with SFF****1
• *-wire interface for integrated Digital Diagnostic monitoring
• SFP+ MSA package with duplex LC connector
• Hot pluggable
• Very low EMI and excellent ESD protection
• *3.3V power supply
• Power consumption less than 1.0W
• Operating case temperature: 0~**0°C

• High-speed storage area networks
• Computer cluster cross-connect
• Custom high-speed data pipes

• Compliant with IEEE **2.3ae****2
• Compliant with MSA SFF****2
• Compliant with MSA SFF****1