Product Description

**0/**0Base-TX UTP to **0Base-FX fiber media convertion
-IEEE**2.3af PoE PSE compatible
*9K bytes packet at cut-through mode
-Built-in AC/DC power supply
-Over-current protection
-choice of SC, BiDi or LC connectors for multimode and singlemode
-DIP switch to set different configurations
-LFP (Link Fault Pass-through) support

POE-FR**0 is a *0/**0Base-TX to **0Base-FX media converter, which allows two types of network segment to be connected easily. Complied with IEEE**2.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with *8V (or other voltage) power supply, providing power to IEEE**2.3af powered device (PD) over CAT5 UTP cable (cable length up to **0meters / **0feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Technical Specifications:

Data Rates:
- *0/**0 Mbps (**2.3 *0Base-T/**2.3u **0Base-T)
- **0Mbps (**0Base-FX)

Input Power Requirements:
- Input voltage ........................... **0 VAC to **0 VAC
- Input frequency ................................. *7 Hz to *3 Hz

Power over Ethernet Output:
- Pin Assignment and Polarity……...4/5 (V+),7/8 (V-)
- Output Power…..please refer to ordering information
- Efficiency ....................................................*5% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery

Environmental Conditions:
- Operating temperature ....................... …0℃ to *0℃
- Cooling ........................................ free air convection
- Storage temperature ...................... **0℃ to **5℃
- Operating Humidity …... *0% max, non-condensing

Mechanical Specifications:
- Case Material………………………………Iron
- Case Color………………………………….Black
- Net Weight…………………….**0g approx. / unit
- Dimensions………**0(W) x *0(H) x **0(L) (mm)
Do not include transceiver length

Connectors:
- AC Inlet……………………………………IEC-J*4
- LAN……………………………….Shielded RJ**5
- Fiber………………………………see ordering information

Ordering Information:

*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below.